{"id":7788,"date":"2026-11-08T04:04:42","date_gmt":"2026-11-08T04:04:42","guid":{"rendered":"https:\/\/koitorhardware.com\/?p=7788"},"modified":"2026-11-14T01:44:45","modified_gmt":"2026-11-14T01:44:45","slug":"old-new-wire-basket-stacking-compatibility","status":"publish","type":"post","link":"https:\/\/koitorhardware.com\/ar\/old-new-wire-basket-stacking-compatibility\/","title":{"rendered":"Wire Basket Stacking Compatibility: Mix Old and New Baskets"},"content":{"rendered":"<p><strong>Wire basket stacking compatibility<\/strong> must be confirmed for the exact incumbent and replacement models in each direction the buyer intends to use. A new basket that rests on an old one does not prove that the old basket can rest on the new one, and two new samples stacking together do not establish either mixed pairing. Buyers should identify the parts, revisions, support points, basket orientation, and intended contents, then record separate evidence for every approved combination. A visual fit check is useful, but it is not a load rating or a blanket safety approval.<\/p>\n<p>Here, wire basket stacking compatibility refers to the exact buyer decision and product scope described in this guide.<\/p>\n<h2>Why does a supplier change create a mixed-basket question?<\/h2>\n<p>When a distributor changes sources, the new item may enter a warehouse or customer fleet while older baskets remain in circulation. The practical question is not simply whether both products are called wire baskets or share similar outside dimensions. It is whether a named pair can be placed together in the required order without an unintended collision, unstable contact, blocked access, or loss of clearance for the contents. The answer belongs to exact model references and actual use conditions.<\/p>\n<p>A manufacturer-published industrial project illustrates why the interface can be intentional: a replacement basket was designed to sit beneath an existing basket, with additional support wires, while movable supports also affected empty nesting. That is a reported project example, not proof that unrelated brands interchange, not evidence for the reverse orientation, and not a Koitor customer case. It shows that support geometry can be designed around a particular mating basket instead of assumed from a category name.<\/p>\n<p>For a home-storage importer, the analogous task is to manage old and new generations during a second-source or transition period. The basket may hold different objects, use a different handle or rim, or have support features at another height. The buyer therefore needs to define whether the pair will be used in storage, display, picking, transport, or another application. Those use cases can impose different requirements and require different evidence. Do not infer intended operating conditions from a product photo.<\/p>\n<h2>What does wire basket stacking compatibility mean for a specific pair?<\/h2>\n<p>Compatibility is a scoped approval between two identified articles in a defined orientation and use. It is not a universal property of a single basket. Record the maker or supplier, item code, revision, finish, key dimensions, and sample identity for both pieces. Then state which one is above the other and how the pair is expected to be supported. If baskets can be rotated or placed in more than one orientation, identify the permitted orientation rather than treating \u201cfits\u201d as self-explanatory.<\/p>\n<p>A fit statement should distinguish the intended contact points from accidental contact. Support feet or rails may be designed to land on a rim or frame. A handle, wire end, label holder, or basket contents may instead touch where they were not intended to. The buyer can ask the supplier to identify the planned support surfaces and any exclusion zones. If the source drawing is unavailable or confidential, the buyer and supplier can agree a controlled reference sample and document the visible interface without copying protected details.<\/p>\n<p>There are at least four distinct combinations for a two-generation family: old above old, new above new, old above new, and new above old. These are not interchangeable test cases. A supplier may have checked one direction only. Mark each relationship as approved, unverified, or not permitted based on actual evidence. Do not fill an untested cell with \u201ccompatible\u201d because its reverse has been checked.<\/p>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Upper basket<\/th>\n<th>Lower basket<\/th>\n<th>What the record establishes<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Old model<\/td>\n<td>Old model<\/td>\n<td>Existing baseline only if the exact references and condition are known<\/td>\n<\/tr>\n<tr>\n<td>New model<\/td>\n<td>New model<\/td>\n<td>New-family pairing; does not prove mixed-generation fit<\/td>\n<\/tr>\n<tr>\n<td>Old model<\/td>\n<td>New model<\/td>\n<td>One mixed direction, requiring its own evidence<\/td>\n<\/tr>\n<tr>\n<td>New model<\/td>\n<td>Old model<\/td>\n<td>Reverse mixed direction, requiring separate evidence<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>This matrix is a way to organize review, not a recommendation to stack any product. The manufacturer\u2019s instructions and the buyer\u2019s intended application remain controlling. If a combination is outside the maker\u2019s intended use, do not test or label it as an approved operating arrangement.<\/p>\n<h2>Which physical interfaces should buyers inspect?<\/h2>\n<p>Begin with the support geometry. Determine whether the upper basket lands on feet, corner posts, side rails, a rim, or another feature. Note how many contact points are intended and whether the basket orientation is keyed. A small change to support height or rail position can alter the mating relationship even when the footprint looks similar. The buyer should use drawings or measured samples to identify the relevant datums, but should not invent a universal tolerance where the supplier has not defined one.<\/p>\n<p>Next, check the frame envelope and clearance around the contact. Look for interference between vertical wires, cross rails, handles, folded edges, protruding joints, or feet. A basket can appear to sit in place while contacting at a point that was not designed to carry the interface. Note visible rocking, incomplete seating, or an upper basket that can shift under the handling actions permitted by its instructions. Record observations and photographs with the model references and orientation visible.<\/p>\n<p>Then consider contents and access. Support features may sit inside the lower basket\u2019s usable opening or reduce room near the top edge. Handles may need to remain accessible. A stored item can rise above the rim or approach a support bar. Empty baskets can therefore appear compatible while a loaded arrangement creates contact or prevents retrieval. Buyers should define the intended contents envelope and assess it under a supplier-approved method; do not perform an improvised loaded stack or exceed maker instructions.<\/p>\n<p>Finish and surface contact also deserve attention. A metal support can rub against a visible surface as baskets are inserted or removed. Such contact may affect appearance, particularly if the pieces have different finishes or protective layers. A sample observation does not establish a corrosion or coating-life result. If cosmetic contact matters, define the visible faces, handling sequence, acceptable marks, and inspection method with the supplier. Keep those requirements distinct from structural or load conclusions.<\/p>\n<h2>Why must buyers check both stacking directions?<\/h2>\n<p>The upper basket presents a different underside than the lower basket presents as a receiving structure. Feet may sit inside a rim in one direction, while the reverse places a rim against an unsupported span or a handle against a crossbar. A shared width or nominal diameter does not make these geometries symmetrical. Reversing the pair changes which surfaces meet and which part carries the contact.<\/p>\n<p>This difference is easy to overlook during supplier transition. A buyer may place a replacement basket on the incumbent model and record \u201cfits.\u201d If the warehouse later puts the older basket on top of the new one, the organization is relying on an unreviewed condition. Instead, the review sheet should name the upper and lower model in plain language, include a small orientation sketch or photograph, and identify the specific assembly state that was inspected.<\/p>\n<p>The same rule applies to revisions within one supplier. A new handle, foot, rim shape, support wire, or finish can change the interface. Preserve the revision identifier and effective date with each observation. If a sample is altered after delivery, record that fact and determine whether it still represents the quoted production design. Never silently treat a hand-adjusted or damaged sample as the approved configuration.<\/p>\n<p>Where the manufacturer documents only one orientation, quote that restriction accurately. Do not broaden \u201cdesigned to sit under model X\u201d into \u201cstacks with model X\u201d without clarifying direction. Similarly, if movable supports are relevant to empty nesting, that is a separate feature and does not itself establish a loaded stacking relationship. Direction and operating state belong in the compatibility statement.<\/p>\n<figure class=\"wp-block-image size-large koitor-blog-image\"><img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-process.webp\" alt=\"wire basket stacking compatibility: trace intended upper and lower contact points\" style=\"width:100%;max-width:960px;height:auto;display:block;margin:0 auto;\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-process-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-process-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-process-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-process-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-process-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-process.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><\/figure>\n<h2>How should buyers review an incumbent basket?<\/h2>\n<p>An old basket is not automatically a reliable dimensional reference. It may have been bent in service, repaired, worn, corroded, or modified. Record its current condition and provenance. If the transition depends on an undamaged production example, ask the buyer\u2019s team to locate a representative approved unit rather than selecting the most convenient basket in a warehouse. If only a worn example is available, mark its limitations and avoid copying damage into a replacement drawing.<\/p>\n<p>Compare the physical sample with any available drawing, purchase specification, product photograph, or supplier reference. Differences between those records should be resolved before a new source is asked to match the old product. A photo can help orient the discussion but cannot define hidden dimensions or confirm an unseen revision. Use an authorized drawing or controlled sample reference and record who approved its use. Do not request unauthorized reverse engineering of a competitor\u2019s confidential design.<\/p>\n<p>For samples, identify the inspection points that matter to the proposed interface: outer envelope, rim or support height, contact wire positions, handle location, and the usable space around support features. The exact dimensions depend on the product and should come from the buyer\u2019s design owner or supplier. This article does not prescribe numerical clearances or tolerance values. If measurement method or datum is unclear, resolve it with the responsible technical reviewer before deciding that a difference is acceptable.<\/p>\n<p>Keep the old and new items labeled throughout review. Similar baskets can become confused once separated from packaging. A simple tag with supplier, model, revision, sample date, finish, and orientation can prevent a photograph or measurement being attributed to the wrong unit. Do not apply adhesive labels to a cosmetic surface if they could affect the finish; use a safe identification method agreed by the owner.<\/p>\n<h3>What can a sample review prove\u2014and what can it not prove?<\/h3>\n<p>A controlled, unpowered fit review can document whether the exact samples seat at the identified support points, whether visible interference occurs, and whether the intended arrangement preserves an agreed clearance envelope. It can also reveal missing features, mislabeling, or differences from the submitted drawing. Record the setup, sample identities, orientation, observed contacts, and unresolved questions. These are observations about those samples under those conditions.<\/p>\n<p>A visual fit check alone does not establish safe working load, dynamic stability, transport suitability, fatigue life, parts-washing compatibility, or performance in a rack or industrial environment. It also does not prove that all production units will match the sample. Those questions require product-specific requirements, supplier evidence, and appropriately qualified evaluation. Do not infer load capacity from wire thickness, apparent mass, weld appearance, or one successful placement.<\/p>\n<p>If a buyer needs a loaded or repeated-use evaluation, the responsible supplier and buyer should agree the applicable conditions and method before proceeding. This article does not instruct users to place improvised loads on a stack or to use baskets in a way the maker does not permit. A sample check should remain within documented instructions and appropriate workplace controls. Where no suitable evidence exists, mark the relationship unverified and choose a safer transition path rather than guessing.<\/p>\n<p>The conclusions should be worded narrowly. \u201cThe identified sample pair seated at the marked support points during the agreed fit review\u201d is different from \u201call old and new baskets are interchangeable.\u201d \u201cNo visible contact with the agreed empty clearance envelope was observed\u201d is different from \u201cthe pair is safe under load.\u201d Match every statement to what was actually checked and preserve exclusions next to the result.<\/p>\n<h3>How is stacking different from nesting and packaging?<\/h3>\n<p>Stacking in use and empty nesting for storage or shipping solve different problems. A nested basket may fit inside another empty basket to reduce space. This does not show that an upper basket can bear on a lower basket, or that contents remain clear when baskets are used together. Conversely, a pair designed to stack may not nest efficiently for shipment. Treat each as a separate product question, with its own drawing, sample, and acceptance evidence.<\/p>\n<p>Packaging creates further interfaces: separators, carton dimensions, restraint, and the way products move during transit. Koitor\u2019s existing basket-nesting and packaging guide covers empty nesting, contact, separators, and movement in the carton. Use that page for packaging decisions. The mixed-generation question here is about exact old\/new products meeting in an intended use arrangement. Do not use carton fit as evidence of in-use compatibility.<\/p>\n<p>The distinction also affects the commercial transition. A replacement can be acceptable for new orders while older baskets remain in service, even if the two generations should not be mixed. In that case, the buyer can label storage zones, segregate picking, or update product instructions according to its own system. If the buyer requires mixed use, obtain evidence for the actual pair. Do not assume that same-category descriptions or similar photographs communicate an approved relationship to warehouse staff or end users.<\/p>\n<h3>What should the buyer put in the supplier request?<\/h3>\n<p>A concise request should name the incumbent and proposed basket, the reason for the change, the intended upper\/lower pairings, and the intended application. Attach authorized drawings or identify representative samples. Ask the supplier to state which interface features it has reviewed, which dimensions or reference points govern the match, what differences remain, and what evidence it can provide. The supplier should identify assumptions instead of silently filling gaps.<\/p>\n<p>The request should also ask for exact revision control, sample identification, finish, package scope, and any restrictions. If the buyer expects a successor to preserve a visible feature or fit an existing fleet, state that explicitly. If the buyer expects compatibility only for empty stacking or only in a specific direction, write that limitation into the item record. Do not request an unqualified \u201ccompatible with all existing baskets\u201d statement when the old references are not defined.<\/p>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Request field<\/th>\n<th>Buyer entry<\/th>\n<th>Review purpose<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Incumbent reference<\/td>\n<td>Maker, item, revision, condition<\/td>\n<td>Identifies the legacy article<\/td>\n<\/tr>\n<tr>\n<td>Proposed reference<\/td>\n<td>Supplier, item, revision, finish<\/td>\n<td>Identifies the replacement article<\/td>\n<\/tr>\n<tr>\n<td>Pair direction<\/td>\n<td>Named upper and lower model<\/td>\n<td>Prevents reverse-direction assumptions<\/td>\n<\/tr>\n<tr>\n<td>Intended use<\/td>\n<td>Storage, picking, display, or other buyer-defined use<\/td>\n<td>Establishes scope without inventing performance<\/td>\n<\/tr>\n<tr>\n<td>Evidence requested<\/td>\n<td>Drawing review, sample observation, or qualified evaluation<\/td>\n<td>Matches conclusion to method<\/td>\n<\/tr>\n<tr>\n<td>Open items<\/td>\n<td>Unknown dimensions, unapproved directions, data limits<\/td>\n<td>Keeps uncertainty visible<\/td>\n<\/tr>\n<tr>\n<td>Transition control<\/td>\n<td>Effective date, segregation, labels, buyer owner<\/td>\n<td>Prevents accidental mixing<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>A supplier may identify that the replacement needs a different support feature or that the requested combination is outside its design scope. Treat that response as useful feasibility information. The buyer can then decide whether to retain separate generations, update the downstream system, request a scoped engineering review, or hold the change. No supplier should be pressured to make an unsupported universal performance promise.<\/p>\n<h3>What are common sourcing mistakes during a basket transition?<\/h3>\n<p><strong>Using \u201csame size\u201d as proof.<\/strong> Nominal dimensions may omit support height, wire positions, rim shape, and handle interference. Define the interface that matters and compare the named pair.<\/p>\n<p><strong>Checking only one direction.<\/strong> An upper basket and lower basket have different contact geometry. Record each intended orientation independently.<\/p>\n<p><strong>Confusing empty nesting with use stacking.<\/strong> A packaging arrangement does not establish a load-bearing or service arrangement. Keep the acceptance records separate.<\/p>\n<p><strong>Using a worn legacy item as the golden sample.<\/strong> A damaged reference can create a false target. Assess condition and locate an authorized representative example where possible.<\/p>\n<p><strong>Treating visual seating as a load test.<\/strong> A sample that rests in place has not thereby passed structural or dynamic evaluation. Keep claims within the method actually performed.<\/p>\n<p><strong>Assuming a new pair proves mixed compatibility.<\/strong> New-on-new says nothing about old-on-new unless those exact items are evaluated too.<\/p>\n<p><strong>Leaving staff to infer restrictions.<\/strong> If generations must be segregated, identify them in the buyer\u2019s item, warehouse, or work instructions. A vague product name is not a control.<\/p>\n<p><strong>Changing a sample without revising its record.<\/strong> A bent, repaired, or hand-adjusted unit may no longer represent the quoted design. Note any intervention and seek the proper controlled sample.<\/p>\n<h3>How should the buyer decide whether to mix, segregate, or hold?<\/h3>\n<p>The decision follows evidence and operational need. If a specific pair is approved for the stated use by the responsible parties, retain the approval with the model revisions and limitations. If only one direction has evidence, authorize only that direction. If no suitable evidence exists but the business can operate the products separately, use a controlled segregation plan and communicate it to affected teams. If the buyer\u2019s requirement depends on mixed use and the evidence is incomplete, hold the change until the interface is resolved.<\/p>\n<p>A transition plan should identify the first order or effective date for the new item, the remaining legacy stock, and who updates product records and instructions. If both generations may appear in the same location, make the distinction visible to the people who handle them. Avoid destroying or modifying old stock solely on the basis of a compatibility uncertainty; disposition decisions require the buyer\u2019s own operational and commercial review.<\/p>\n<p>The supplier change may affect more than physical stacking. A new model can have a different package, finish, accessory, or product code. Coordinate the transition with purchasing, quality, warehouse, catalogue, and customer-service owners. Confirm that listings do not imply universal compatibility unless that is supported. If the change is only a new source for the same buyer-defined item, maintain a clear revision history so future claims and service questions can be traced.<\/p>\n<p>Koitor Hardware is a family-owned factory and custom metal hardware manufacturer focused on bathroom and home-storage hardware. The existing custom metal storage basket page explains confirmed product and sourcing scope. It does not establish that a particular Koitor basket will match an incumbent basket or that any pair has a load rating. A project needs drawings or physical samples and a bounded feasibility review before manufacturing capability or compatibility can be discussed.<\/p>\n<h2>Buyer checklist for a mixed-generation stack review<\/h2>\n<ul>\n<li>Record the exact supplier, model, revision, finish, and condition of both baskets.<\/li>\n<li>Identify the upper basket and lower basket separately for every intended pairing.<\/li>\n<li>State the permitted orientation and the buyer-defined use case.<\/li>\n<li>Mark intended support surfaces and note visible interference or unplanned contact.<\/li>\n<li>Define the contents envelope, handle access, and retrieval needs relevant to that use.<\/li>\n<li>Keep empty nesting and packaging checks separate from in-use stacking review.<\/li>\n<li>Record sample setup, observations, photographs, reviewer, date, and limitations.<\/li>\n<li>Keep load, repeated-use, transit, and environment claims under their own evidence gates.<\/li>\n<li>Mark untested combinations as unverified rather than assuming reverse compatibility.<\/li>\n<li>Set a transition control for old and new stock and communicate any restriction.<\/li>\n<\/ul>\n<figure class=\"wp-block-image size-large koitor-blog-image\"><img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-checklist.webp\" alt=\"wire basket stacking compatibility: buyer checklist for old and replacement basket references\" style=\"width:100%;max-width:960px;height:auto;display:block;margin:0 auto;\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-checklist-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-checklist-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-checklist-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-checklist-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-checklist-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1517-checklist.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><\/figure>\n<h2>\u0627\u0644\u0623\u0633\u0626\u0644\u0629 \u0627\u0644\u0634\u0627\u0626\u0639\u0629<\/h2>\n<h3>If two baskets have the same width, are they compatible?<\/h3>\n<p>Not necessarily. Width does not define support location, frame geometry, handle clearance, or intended orientation. Check the exact pair and its support interfaces.<\/p>\n<h3>Does one successful direction approve the reverse direction?<\/h3>\n<p>No. The upper and lower parts present different surfaces. Record and review each direction independently.<\/p>\n<h3>Does empty nesting prove stacking compatibility?<\/h3>\n<p>No. Nesting is a packaging or storage relationship between empty products. It does not establish an in-use pair or load performance.<\/p>\n<h3>Can a visual sample review establish safe load capacity?<\/h3>\n<p>No. It can record visible fit under the agreed setup. Load and dynamic claims require separate, product-specific requirements and qualified evidence.<\/p>\n<h3>What if the replacement basket cannot mix with legacy stock?<\/h3>\n<p>The buyer may keep generations segregated, update instructions, request another design review, or hold the change. The choice depends on operational need and verified evidence.<\/p>\n<h3>Does Koitor already have a compatible basket for my old model?<\/h3>\n<p>No compatibility is asserted without the exact references and review. Koitor\u2019s confirmed scope is bathroom and home-storage metal hardware; project feasibility must be assessed from the drawing or sample.<\/p>\n<h3>\u0627\u0644\u0645\u0635\u0627\u062f\u0631<\/h3>\n<ul>\n<li><a href=\"https:\/\/www.marlinwire.com\/blog\/stacking-wire-baskets\" rel=\"nofollow noopener\" target=\"_blank\">Marlin Wire: stacking wire baskets<\/a> \u2014 manufacturer-reported historical project; supports a directional interface example, not a universal compatibility or load claim.<\/li>\n<li><a href=\"https:\/\/koitorhardware.com\/ar\/custom-metal-storage-basket-manufacturer\/\">Koitor custom metal storage basket manufacturing<\/a> \u2014 existing commercial page for confirmed product and sourcing scope.<\/li>\n<li><a href=\"https:\/\/koitorhardware.com\/ar\/custom-metal-storage-rack-manufacturer\/\">Koitor metal basket nesting and packaging<\/a> \u2014 separate guide for empty nesting and transit packaging.<\/li>\n<\/ul>\n<h3>\u0627\u0639\u0645\u0644 \u0645\u0639 \u0634\u0631\u0643\u0629 \u00ab\u0643\u0648\u064a\u062a\u0648\u0631\u00bb \u0644\u0644\u0623\u062f\u0648\u0627\u062a<\/h3>\n<section class=\"koitor-blog-cta\" style=\"margin-top:42px;padding:28px;border:1px solid #D0D5DD;border-radius:16px;background:#F8FAFC;\">\n<h3 style=\"margin-top:0;margin-bottom:12px;font-size:28px;line-height:1.25;\">Review a defined basket interface<\/h3>\n<p style=\"font-size:16px;line-height:1.7;margin-bottom:20px;\">Share authorized old and proposed basket references, intended upper and lower pairings, application, and order range. Koitor can first confirm whether the defined metal hardware scope fits its established bathroom and home-storage capabilities.<\/p>\n<div style=\"display:flex;gap:12px;flex-wrap:wrap;\">\n<a href=\"https:\/\/koitorhardware.com\/ar\/%d8%a7%d9%84%d8%a7%d8%aa%d8%b5%d8%a7%d9%84\/\" style=\"display:inline-flex;padding:12px 20px;border-radius:8px;background:#FF5A1F;color:#ffffff;font-weight:700;text-decoration:none;\">Discuss the project scope<\/a><br \/>\n<a href=\"https:\/\/koitorhardware.com\/ar\/custom-metal-storage-basket-manufacturer\/\" style=\"display:inline-flex;padding:12px 20px;border-radius:8px;border:1px solid #FF5A1F;color:#FF5A1F;font-weight:700;text-decoration:none;\">Review metal basket scope<\/a>\n<\/div>\n<div class=\"koitor-article-tags\" style=\"display:flex;gap:8px;flex-wrap:wrap;margin-top:18px\"><span style=\"display:inline-flex;align-items:center;padding:6px 10px;border-radius:999px;background:#FFF3ED;color:#8A3514\">\u0623\u062f\u0648\u0627\u062a \u062a\u062e\u0632\u064a\u0646 \u0645\u0639\u062f\u0646\u064a\u0629<\/span><span style=\"display:inline-flex;align-items:center;padding:6px 10px;border-radius:999px;background:#FFF3ED;color:#8A3514\">Supplier Evaluation<\/span><span style=\"display:inline-flex;align-items:center;padding:6px 10px;border-radius:999px;background:#FFF3ED;color:#8A3514\">\u0627\u0644\u0645\u0648\u0627\u0641\u0642\u0629 \u0639\u0644\u0649 \u0627\u0644\u0639\u064a\u0646\u0629<\/span><\/div>\n<\/section>","protected":false},"excerpt":{"rendered":"<p>A buyer guide for checking incumbent and replacement wire baskets in each intended upper and lower position before a supplier change.<\/p>","protected":false},"author":1,"featured_media":7785,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[5],"tags":[48,76,95],"class_list":["post-7788","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-product-knowledge","tag-metal-storage-hardware","tag-sample-approval","tag-supplier-evaluation"],"_links":{"self":[{"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/posts\/7788","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/comments?post=7788"}],"version-history":[{"count":1,"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/posts\/7788\/revisions"}],"predecessor-version":[{"id":7789,"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/posts\/7788\/revisions\/7789"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/media\/7785"}],"wp:attachment":[{"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/media?parent=7788"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/categories?post=7788"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/koitorhardware.com\/ar\/wp-json\/wp\/v2\/tags?post=7788"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}