{"id":9021,"date":"2026-11-19T03:16:59","date_gmt":"2026-11-19T03:16:59","guid":{"rendered":"https:\/\/koitorhardware.com\/?p=9021"},"modified":"2026-11-19T03:16:59","modified_gmt":"2026-11-19T03:16:59","slug":"ductility-vs-malleability","status":"publish","type":"post","link":"https:\/\/koitorhardware.com\/de\/ductility-vs-malleability\/","title":{"rendered":"Ductility vs Malleability: Understand Tensile and Compressive Deformation"},"content":{"rendered":"<p>Ductility vs malleability is a comparison between two related ways of describing permanent deformation: ductility refers conventionally to deformation under tensile loading, while malleability refers conventionally to deformation under compressive loading. Both concern plastic deformation before fracture, but neither term is a universal grade score or a guarantee that a particular part can be bent, drawn, stamped or formed successfully. Buyers should use the distinction to ask a clearer question about the actual material, condition, geometry and manufacturing operation. The useful ductility vs malleability distinction is the loading context, not a simple quality ranking.<\/p>\n<p>For sourcing, the practical point is simple: do not substitute one property word for another in a drawing or supplier discussion. A tensile elongation result may be relevant to tensile ductility under a specified test, but it does not by itself describe every forming operation. Likewise, calling a metal \u201cmalleable\u201d does not establish a safe bend radius, production yield or finished-product load capacity. The use case and evidence must be made specific.<\/p>\n<h2>What do ductility and malleability mean?<\/h2>\n<p>Ductility describes a material\u2019s capacity for plastic deformation when it is pulled in tension before it fractures. Tensile tests can report measures such as elongation or reduction of area, subject to the specimen geometry, test procedure, material condition and reporting basis. These values help characterize behavior in the test context. They do not describe every possible forming direction or local stress state.<\/p>\n<p>Malleability describes the capacity to undergo plastic deformation under compressive loading, such as flattening or shaping. Educational materials commonly distinguish malleability by compression and ductility by tension. The distinction is useful for introductory materials language, but real manufacturing is not always a clean one-axis laboratory event. A formed feature can have tension on one surface and compression on another, while friction, tooling, geometry and material direction also affect deformation.<\/p>\n<p>Both words refer to permanent shape change, which is different from elastic deformation. An elastic change recovers when load is removed; a plastic change remains after unloading. Actual metals can show both responses in sequence. This article does not assign a numeric boundary between them or claim that one property alone predicts whether a component will crack, spring back or hold a service load. Penn State&#8217;s materials teaching resource describes the conventional tension\/compression distinction; its educational explanation is not a supplier qualification for a particular grade or finished product (<a href=\"https:\/\/courses.ems.psu.edu\/matse81\/node\/2107\" rel=\"nofollow noopener\" target=\"_blank\">Penn State materials course<\/a>).<\/p>\n<p>A buyer may encounter these terms in a material discussion, drawing review, supplier explanation or general guide. Ask what exact behavior is meant, what material and condition are under consideration, and what operation the evidence is intended to inform. If the concern is bending wire, forming sheet, upsetting a feature or drawing a shape, name that operation rather than relying on a broad adjective.<\/p>\n<h2>Why does the loading mode matter to a buyer?<\/h2>\n<p>The loading mode keeps a property discussion connected to a question. If a component is expected to undergo a stretching operation, ductility is the closer general concept. If material is to be shaped by compressive deformation, malleability is the closer general concept. That is a starting point for discussion, not a process qualification.<\/p>\n<p>For example, a wire-forming question may involve tension during drawing, bending around tooling, and local deformation at a hook or return. A sheet-forming question may involve stretching in one zone, compression in another, bending around a radius, and springback after release. A broad statement that a metal is ductile or malleable may help explain why deformation is possible, but it cannot settle whether the proposed part geometry and production method are suitable.<\/p>\n<p>The distinction also helps separate forming behavior from in-service performance. A metal that can be formed without fracture is not automatically strong enough, stiff enough or durable enough for the finished product. A component\u2019s load behavior depends on factors such as geometry, dimensions, joining, support and use conditions. Conversely, a product\u2019s load requirement should not be inferred from a material\u2019s ability to undergo plastic deformation during manufacture.<\/p>\n<p>A procurement record should therefore distinguish at least three questions:<\/p>\n<ul>\n<li>What deformation mode or manufacturing operation is being discussed?<\/li>\n<li>Which property, test or supplier evidence is relevant to that mode?<\/li>\n<li>What separate finished-part requirement must the product meet after forming and assembly?<\/li>\n<\/ul>\n<p>This helps prevent a tensile test value from being treated as an all-purpose \u201cformability\u201d certificate. It also keeps a discussion about malleability from being used to make an unsupported strength or safety statement.<\/p>\n<h3>How do the terms differ from hardness, strength and toughness?<\/h3>\n<p>The terms often appear alongside other material properties, but they answer different questions. Hardness commonly concerns resistance to localized indentation or scratching under a defined method. Strength refers to resistance to a specified type of loading at a stated condition. Toughness concerns energy absorption and resistance to fracture under a particular loading and test context. Ductility and malleability describe plastic deformation under conventionally tensile and compressive modes.<\/p>\n<p>A single property cannot stand in for all the others. A hardness value does not automatically prove that a sheet can be formed to a tight radius. A tensile strength result does not specify how much plastic elongation occurs. A ductility result does not guarantee impact resistance of the final assembly. A general claim that a metal is malleable does not establish its hardness, finish quality or service life.<\/p>\n<p>The question should be written as a requirement, not merely as a preferred adjective. Instead of \u201cuse a ductile metal,\u201d a buyer might ask the supplier to identify the grade and condition and explain what evidence is available for the specified forming operation. Instead of \u201cthe part must be malleable,\u201d a product team could state the geometry, material condition, manufacturing route and acceptance criteria that matter. A responsible technical owner can then determine whether a test, sample or engineering assessment is appropriate.<\/p>\n<p>Related concepts can still be useful when kept in their proper scope. Tensile-testing evidence can include measures such as elongation or reduction of area, with interpretation tied to specimen and test conditions; see the <a href=\"https:\/\/www.twi-global.com\/what-we-do\/services-and-support\/tensile-testing-laboratory\" rel=\"nofollow noopener\" target=\"_blank\">TWI tensile testing overview<\/a>. Neither a test overview nor this article is a substitute for a part-specific forming review.<\/p>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Term<\/th>\n<th>Conventional question<\/th>\n<th>Possible evidence context<\/th>\n<th>What the term alone does not establish<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Ductility<\/td>\n<td>How much plastic deformation occurs in tension before fracture?<\/td>\n<td>Tensile test measures such as elongation or reduction of area, under stated conditions<\/td>\n<td>Suitability for every bend, draw, formed feature or finished-part load<\/td>\n<\/tr>\n<tr>\n<td>Malleability<\/td>\n<td>Can material undergo plastic shaping under compression?<\/td>\n<td>Material behavior discussed for a specified compressive shaping context<\/td>\n<td>A universal production limit, bend radius or acceptance result<\/td>\n<\/tr>\n<tr>\n<td>Hardness<\/td>\n<td>How does a surface or material respond to a defined indentation method?<\/td>\n<td>A hardness test using a named method and conditions<\/td>\n<td>Formability, toughness or corrosion performance<\/td>\n<\/tr>\n<tr>\n<td>Strength<\/td>\n<td>What load or stress is resisted under a defined mode and criterion?<\/td>\n<td>Tensile, shear, compression or other specified testing<\/td>\n<td>Plastic deformation capacity under every manufacturing route<\/td>\n<\/tr>\n<tr>\n<td>Toughness<\/td>\n<td>How does a specimen or component absorb energy before fracture under defined conditions?<\/td>\n<td>Impact or fracture-related evidence matched to a method<\/td>\n<td>Forming behavior or service performance outside the tested scope<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h2>What influences deformation in a real forming operation?<\/h2>\n<p>Material name is only one input. Grade, chemical composition range, prior processing, temper or condition, thickness, product form, grain direction and material history can influence how a specific stock behaves. The forming operation adds more variables: tool geometry, bend radius, stroke, sequence, lubrication, support, speed and local stress concentration. The finished design can also include holes, welds, notches or sharp transitions that change how strain is distributed.<\/p>\n<p>These factors explain why a general chart or classroom definition should not be used to approve a production drawing. Even when a test result is relevant, the buyer should know what specimen was tested and whether it represents the material and condition being purchased. A number without test method, specimen orientation, dimensions, condition and reporting basis may be difficult to compare across suppliers.<\/p>\n<p>Direction matters in products made from rolled or otherwise processed stock. Properties may not be identical in every orientation. A supplier or engineer should say whether the direction of a relevant result matches the way the material will be formed. This is not a claim that every product requires a particular specialized test; the product owner should decide what evidence is justified by the geometry, risk and specification.<\/p>\n<p>Temperature and prior condition can also affect material behavior, but buyers should avoid turning that observation into an unreviewed processing instruction. A change in heat treatment or material condition can affect other properties and may require process control and technical approval. The appropriate question is whether the proposed condition is documented, traceable and suitable for the specified product\u2014not whether one universal heat step makes a material \u201cmore ductile.\u201d In other words, a ductility vs malleability discussion should name the operation and condition together instead of treating either word as a free-standing purchasing specification.<\/p>\n<p>For custom metal hardware, the forming operation may be only one stage among cutting, punching, bending, welding, polishing, finishing and assembly. The part that emerges from a forming operation may subsequently be joined or coated. Review the complete process sequence where it matters to the design. A formed bracket with a cosmetic face, for instance, has different evidence and appearance concerns from a simple flat coupon, even if the base material family is the same.<\/p>\n<figure class=\"koitor-blog-image\" style=\"width:100%;max-width:960px;margin:28px auto;text-align:center;\"><img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-process-ductility-vs-malleability-delivery.webp\" alt=\"Separate metal specimens illustrating tensile elongation and compressive shaping without numeric results for a ductility vs malleability buyer guide\" style=\"width:100%;max-width:960px;height:auto;\" loading=\"lazy\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-process-ductility-vs-malleability-delivery-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-process-ductility-vs-malleability-delivery-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-process-ductility-vs-malleability-delivery-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-process-ductility-vs-malleability-delivery-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-process-ductility-vs-malleability-delivery-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-process-ductility-vs-malleability-delivery.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\"\/><figcaption>The loading mode and part geometry both matter when discussing deformation.<\/figcaption><\/figure>\n<h2>What should a buyer ask a supplier?<\/h2>\n<p>Begin with the intended product, drawing or sample and make the operation explicit. A useful request identifies the material grade or approved alternatives, product form and thickness; the feature that is being formed; the critical dimensions and cosmetic surfaces; the intended process; and the point at which a sample must be reviewed. If a property limit is specified, include its test method, specimen or sampling basis, units and acceptance criteria where these have been established by the responsible engineer.<\/p>\n<p>Then ask the supplier what the available evidence actually covers. Does a report concern the proposed grade and condition? Was it obtained from the same material form and orientation? Is it a supplier declaration, a test report or a production inspection record? Does it describe a raw material specimen or a finished component? These distinctions allow a buyer to assess relevance without expecting a document to prove more than it does.<\/p>\n<p>When the supplier cannot confirm a forming outcome from existing information, keep the issue open and agree a next step. That may involve drawing clarification, a prototype, a reviewed sample, an engineering assessment or an agreed test. The right next step depends on the actual component and requirement. Do not infer that lack of a specific test means failure; equally, do not infer successful production from a broad material description.<\/p>\n<p>For an RFQ, include:<\/p>\n<ul>\n<li>Part number, drawing revision and the feature to be formed.<\/li>\n<li>Intended material grade, condition, form and thickness, or the approved substitution process.<\/li>\n<li>The manufacturing operation and any critical orientation or cosmetic-face requirement.<\/li>\n<li>Critical dimensions, tolerances, bend geometry and areas where cracking, distortion or visible marks are unacceptable.<\/li>\n<li>Required supplier documentation and the owner responsible for accepting it.<\/li>\n<li>Sample quantity, review method and sign-off authority.<\/li>\n<li>What changes to grade, source, condition, tooling or sequence require notice and approval.<\/li>\n<li>Packaging and identification details that preserve part and revision traceability.<\/li>\n<\/ul>\n<p>This information makes quotations easier to compare. If one supplier quotes a different grade, thickness, tooling assumption or finishing sequence, ask for the difference to be declared instead of treating the price as like-for-like. An equivalent material substitution should be defined and approved, not assumed from similar names.<\/p>\n<h3>How should a sample and production release be controlled?<\/h3>\n<p>A sample is a decision point, not a universal guarantee. Identify the sample with its part number, drawing revision, material declaration, supplier and date. Record the dimensions and visual characteristics that were actually reviewed. If the sample differs from production stock or process in a relevant way, document the difference and whether the team accepts it as representative.<\/p>\n<p>Before release, ask who has authority to approve material and process changes. Changes may include a different grade, thickness, source, orientation, condition, tooling route, bend sequence or finish. Some changes may be acceptable; others may affect fit, appearance or evidence applicability. The approval process should identify who reviews the change and which records must be revised.<\/p>\n<p>Incoming checks should be matched to the purchase specification. A visual inspection can identify obvious cracks, distortion, burrs or surface marks, but it does not prove a material property that is not visible. Dimensional inspection can check selected features against a drawing, but a few dimensions do not prove the entire production process is controlled. Documentation can confirm what the supplier declared, though it should be matched to lot and revision. If a critical property needs independent confirmation, define the verification route with the technical owner.<\/p>\n<p>Avoid describing every forming mark as a material failure without reviewing the drawing, process and acceptance criteria. Some marks may be cosmetic and some may signal a functional issue; the decision depends on location, use and agreed requirements. Likewise, a part that looks acceptable in a sample may still need production controls for repeatability. Keep evidence for the approved sample and state how production lots will be compared with it.<\/p>\n<h3>Common interpretation mistakes<\/h3>\n<p><strong>Treating the terms as synonyms.<\/strong> They are related descriptions of plastic deformation, but conventionally refer to different loading modes. Use the word that matches the question and explain the operation.<\/p>\n<p><strong>Equating ductility with elasticity.<\/strong> Elastic recovery and permanent plastic change are different. A material can deform elastically before plastic flow; neither term should be used casually to predict exact springback.<\/p>\n<p><strong>Using hardness as a forming proxy.<\/strong> A hardness result may answer its own defined question but does not automatically measure tensile ductility or compressive shaping behavior.<\/p>\n<p><strong>Assuming a tensile number predicts every forming process.<\/strong> Test values depend on method and specimen. They do not independently establish suitability for every complex shape, direction, thickness or production route.<\/p>\n<p><strong>Using \u201cmalleable\u201d to imply a finished part is strong.<\/strong> Forming behavior during manufacture and load performance in service are separate requirements.<\/p>\n<p><strong>Assuming a sample proves all production lots.<\/strong> The sample is tied to a specific configuration and must be connected to production controls and approved changes.<\/p>\n<p><strong>Changing material without updating the record.<\/strong> A substitute must be identified and reviewed against the same product needs. A similar family name is not an approval.<\/p>\n<p><strong>Requesting a property without defining the acceptance basis.<\/strong> A specification should say which method, specimen basis and threshold apply when a numeric requirement is necessary. If no criterion exists, the buyer should have the responsible engineer define it rather than selecting an arbitrary number.<\/p>\n<h3>When is a material or process review needed?<\/h3>\n<p>A deeper review is appropriate when the part has a critical formed feature, repeated production cracking, significant variability between lots, an unusual material direction, a tight geometric constraint, or a safety-related role. The reviewer should have the appropriate technical expertise and access to the actual drawing, material identity, process and evidence. This article provides buyer language and comparison boundaries; it does not replace engineering judgment, a qualified laboratory or a product-specific compliance assessment.<\/p>\n<p>For routine parts, the appropriate level of evidence may be simpler: a clearly defined material and thickness, a drawing review, a representative sample, and inspection criteria that match the purchase specification. The requirement should be proportionate to the product and risk. Neither a broad demand for every possible test nor an unsupported blanket assurance helps a buyer make a clear decision.<\/p>\n<p>If the requirement concerns a regulated or safety-critical product, confirm applicable rules and standards for the destination market with the responsible compliance professional. Do not use a general discussion of ductility or malleability as evidence of compliance. Requirements depend on product type, jurisdiction and intended use, and may change.<\/p>\n<h2>How does this connect to custom metal hardware sourcing?<\/h2>\n<p>A bathroom or home-storage product may include formed metal parts such as wire baskets, brackets, rails, hooks or supports. For such items, the drawing and sample can support a practical discussion about the feature, material, process sequence and quality checkpoints. Koitor Hardware is a family-owned custom metal hardware factory with drawing- and sample-based OEM discussion for relevant metal products. This does not imply a particular alloy, forming limit, test result or guaranteed performance for a design that has not been reviewed.<\/p>\n<p>When contacting a manufacturer, share the drawing or physical sample, annual or trial quantity, target market, finish, packaging and the specific forming concern. Identify whether the question is about material selection, a bend or formed feature, fit, cosmetic appearance, sample changes or production consistency. This lets the supplier clarify the information required for a quotation and indicate where additional technical evidence is needed.<\/p>\n<p>The <a href=\"https:\/\/koitorhardware.com\/oem-home-storage-hardware-manufacturer\/\">OEM home-storage hardware overview<\/a> explains Koitor&#8217;s relevant manufacturing context. For a project-specific discussion, provide the product drawing or sample and define the material and process questions to be resolved.<\/p>\n<h3>Buyer checklist before an RFQ<\/h3>\n<ul>\n<li>[ ] Name the material grade or define who approves alternatives.<\/li>\n<li>[ ] Record the material form, condition, thickness and relevant orientation.<\/li>\n<li>[ ] Identify the forming operation and the critical feature.<\/li>\n<li>[ ] Mark critical dimensions, tolerances and cosmetic faces on the drawing.<\/li>\n<li>[ ] State what evidence applies and what it does not prove.<\/li>\n<li>[ ] Define sample identification, approval authority and production release.<\/li>\n<li>[ ] Specify the changes that require prior notice or approval.<\/li>\n<li>[ ] Set receiving checks that match the purchase specification.<\/li>\n<li>[ ] Keep forming behavior separate from hardness, strength and service-load requirements.<\/li>\n<li>[ ] Obtain technical review where the application or risk requires it.<\/li>\n<\/ul>\n<figure class=\"koitor-blog-image\" style=\"width:100%;max-width:960px;margin:28px auto;text-align:center;\"><img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-checklist-ductility-vs-malleability-delivery.webp\" alt=\"Metal forming buyer review scene with sample, drawing and blank checklist for the ductility vs malleability guide\" style=\"width:100%;max-width:960px;height:auto;\" loading=\"lazy\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-checklist-ductility-vs-malleability-delivery-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-checklist-ductility-vs-malleability-delivery-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-checklist-ductility-vs-malleability-delivery-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-checklist-ductility-vs-malleability-delivery-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-checklist-ductility-vs-malleability-delivery-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1755-checklist-ductility-vs-malleability-delivery.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\"\/><figcaption>Use the sample and specification review to tie terms to the actual part.<\/figcaption><\/figure>\n<h2>Frequently asked questions<\/h2>\n<h3>Are ductility and malleability the same?<\/h3>\n<p>No. Both describe plastic deformation, but ductility conventionally concerns deformation in tension and malleability concerns shaping under compression. Their practical relevance depends on the material, condition, geometry and operation.<\/p>\n<h3>Does high tensile elongation guarantee easy bending?<\/h3>\n<p>No. Elongation is tied to a specified tensile test and specimen. Bending introduces geometry, direction, tooling and local strain conditions that are not fully described by one tensile number.<\/p>\n<h3>Does a malleable material have to be soft?<\/h3>\n<p>\u201cMalleable\u201d is not a substitute for a hardness result. Hardness and compressive shaping behavior are different property questions; use evidence suited to the requirement.<\/p>\n<h3>Can a sample prove production consistency?<\/h3>\n<p>A sample can establish an approved reference and reveal some fit, appearance or manufacturing issues. It does not alone establish that later production lots will match; define supplier controls, inspection and change approval.<\/p>\n<h2>Work with Koitor Hardware<\/h2>\n<p>Share a drawing or sample, the material or approved alternative, the formed feature, target quantity and unresolved acceptance question. Koitor can review the custom metal hardware context and clarify the information needed for a project-specific quotation.<\/p>\n<section class=\"koitor-blog-cta\" style=\"margin-top:42px;padding:28px;border:1px solid #D0D5DD;border-radius:16px;background:#F8FAFC;\">\n<h2 style=\"margin-top:0;margin-bottom:12px;font-size:28px;line-height:1.25;\">Discuss a Custom Metal Forming Requirement<\/h2>\n<p style=\"font-size:16px;line-height:1.7;margin-bottom:20px;\">Share the drawing or sample, material identity, formed feature and unresolved acceptance question. Koitor can discuss the custom metal hardware scope and clarify information needed for a project-specific quotation.<\/p>\n<div style=\"display:flex;gap:12px;flex-wrap:wrap;\">\n    <a href=\"https:\/\/koitorhardware.com\/contact\/\" style=\"display:inline-block;padding:12px 20px;border-radius:8px;background:#FF5A1F;color:#ffffff;font-weight:700;text-decoration:none;\">Request a Quote<\/a><br \/>\n    <a href=\"https:\/\/koitorhardware.com\/oem-home-storage-hardware-manufacturer\/\" style=\"display:inline-block;padding:12px 20px;border-radius:8px;border:1px solid #FF5A1F;color:#FF5A1F;font-weight:700;text-decoration:none;\">Discuss OEM Options<\/a>\n  <\/div>\n<div class=\"koitor-article-tags\" style=\"display:flex;gap:8px;flex-wrap:wrap;margin-top:18px;\">\n    <span style=\"display:inline-flex;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#C2410C;\">Importer Buying Guide<\/span><br \/>\n    <span style=\"display:inline-flex;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#C2410C;\">Metal Storage Hardware<\/span><br \/>\n    <span style=\"display:inline-flex;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#C2410C;\">Small Batch OEM<\/span>\n  <\/div>\n<\/section>\n","protected":false},"excerpt":{"rendered":"<p>Ductility vs malleability is a comparison between two related ways of describing permanent deformation: ductility refers conventionally to deformation under tensile loading, while malleability refers conventionally to deformation under compressive loading. Both concern plastic deformation before fracture, but neither term is a universal grade score or a guarantee that a particular part can be bent, [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":9015,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[17],"tags":[40,48,39],"class_list":["post-9021","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-materials-finishes","tag-importer-buying-guide","tag-metal-storage-hardware","tag-small-batch-oem"],"_links":{"self":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts\/9021","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/comments?post=9021"}],"version-history":[{"count":1,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts\/9021\/revisions"}],"predecessor-version":[{"id":9054,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts\/9021\/revisions\/9054"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/media\/9015"}],"wp:attachment":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/media?parent=9021"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/categories?post=9021"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/tags?post=9021"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}