{"id":9212,"date":"2026-11-20T05:12:43","date_gmt":"2026-11-20T05:12:43","guid":{"rendered":"https:\/\/koitorhardware.com\/?p=9212"},"modified":"2026-11-20T05:12:43","modified_gmt":"2026-11-20T05:12:43","slug":"sheet-metal-vs-plate-actual-thickness","status":"publish","type":"post","link":"https:\/\/koitorhardware.com\/de\/sheet-metal-vs-plate-actual-thickness\/","title":{"rendered":"Sheet Metal vs Plate: Identify the Product Convention and Actual Thickness"},"content":{"rendered":"<p>Sheet metal vs plate is usually a comparison of flat metal product descriptions, with plate generally referring to thicker stock, but the naming boundary depends on the material, supplier and applicable specification. A generic cutoff quoted online should not replace the actual project requirement. For a hardware buyer, the reliable purchasing description states the material or grade, actual thickness and units, applicable tolerance, surface or supplied condition, and the finished component requirements. This separates a stock label from the dimensions and performance decisions that an engineer must approve.<\/p>\n<h2>What does \u201csheet metal vs plate\u201d mean on a hardware drawing?<\/h2>\n<p>Sheet and plate both describe flat metal stock, and thickness is commonly the most visible distinction: sheet is generally thinner, while plate is generally thicker. The exact naming boundary is not universal across every metal, product standard, supplier catalog or market. A buyer should treat the word as a useful stock-form label, then confirm the actual dimensional and material information that controls the order.<\/p>\n<p>A stock supplier may use a particular threshold to organize inventory or explain its product range. For example, Metal Supermarkets describes a thickness-based distinction in its educational page, while also noting that gauge and decimal measurements are used in sheet products. Polished Metals similarly presents a thickness-based convention and recognizes overlap in some contexts. These are supplier explanations, not a universal procurement rule for every alloy, standard or finished product. This article therefore does not adopt either company\u2019s stated numeric boundary as a mandatory definition.<\/p>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Buyer question<\/th>\n<th>Sheet\/plate label may suggest<\/th>\n<th>What to state or verify for an order<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>What form is being purchased?<\/td>\n<td>Flat stock, often described as sheet or plate<\/td>\n<td>Supplier\u2019s product form and applicable specification<\/td>\n<\/tr>\n<tr>\n<td>What thickness is required?<\/td>\n<td>A broad relative category<\/td>\n<td>Actual nominal thickness, units and agreed tolerance<\/td>\n<\/tr>\n<tr>\n<td>What material is required?<\/td>\n<td>Nothing definitive from the form label<\/td>\n<td>Grade\/alloy and condition from the controlled specification<\/td>\n<\/tr>\n<tr>\n<td>What surface is supplied?<\/td>\n<td>Nothing definitive from \u201csheet\u201d or \u201cplate\u201d<\/td>\n<td>Surface, coating, finish or delivery condition as relevant<\/td>\n<\/tr>\n<tr>\n<td>What will the finished part do?<\/td>\n<td>Nothing definitive from stock nomenclature<\/td>\n<td>Part geometry, formed features, assembly and functional requirements<\/td>\n<\/tr>\n<tr>\n<td>Which party owns the interpretation?<\/td>\n<td>Often unclear if documents conflict<\/td>\n<td>Buyer\/design authority and the supplier\u2019s written quotation basis<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>A product can be called sheet by one supplier and described differently in another catalog while still requiring the same actual thickness and material information. This does not mean labels are useless. It means a buyer should not let a catalog category carry more technical meaning than the documents support. The drawing and purchase specification must still define the part the supplier is expected to provide.<\/p>\n<h2>Why can the sheet and plate boundary vary?<\/h2>\n<p>Stock nomenclature evolves across products, materials, industry practices and sales catalogs. Suppliers may organize inventory around a threshold that works for their own range; technical specifications may define a product form differently. Units also influence how a category appears to a buyer: a U.S. catalog may emphasize inches, while another supplier presents millimeters. A rounded conversion near a boundary can create the impression of a universal dividing line when it may only reflect one company\u2019s convention.<\/p>\n<p>The purchasing consequence is straightforward. If the requirement sits near a supplier\u2019s naming boundary, do not argue over the label before confirming the measured stock. Ask what actual product the quotation includes and identify the governing material specification. If the supplier quotes \u201cplate\u201d but the drawing specifies a dimension and grade, the buyer should verify whether the quoted stock meets that controlled requirement rather than assume the word signals a stronger or more suitable choice.<\/p>\n<p>A label also does not say whether a product is hot-rolled, cold-rolled, pickled, oiled, coated, polished or otherwise delivered. Those are separate material and surface descriptions. A quotation should disclose the relevant condition when it affects subsequent forming, joining, appearance, corrosion protection or acceptance. Do not infer a process route solely from the word sheet or plate.<\/p>\n<p>For projects involving gauge terminology, use Koitor\u2019s separate guide to sheet-metal gauge versus actual thickness. That page focuses on the gauge-to-thickness issue. Here the focus is the broader naming convention and how the buyer specifies flat stock without relying on a label alone.<\/p>\n<h2>Which information should replace an ambiguous stock label?<\/h2>\n<p>The exact fields depend on the part and its governing material specification, but an RFQ should make the controlling requirement traceable. At minimum, buyers generally need to identify the material designation, actual thickness and unit, relevant tolerance, supplied surface or condition, and the drawing revision. If the application requires a particular orientation, grain direction, finish, protective film or certificate, those details need their own written requirement and should not be implied by \u201csheet\u201d or \u201cplate.\u201d<\/p>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Specification field<\/th>\n<th>Buyer\u2019s question<\/th>\n<th>Why the field matters<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Material identity<\/td>\n<td>Which grade, alloy or material designation governs?<\/td>\n<td>Similar stock form can come in different materials and conditions<\/td>\n<\/tr>\n<tr>\n<td>Actual thickness<\/td>\n<td>What number and unit define the nominal stock?<\/td>\n<td>A form label does not give a usable dimension<\/td>\n<\/tr>\n<tr>\n<td>Tolerance<\/td>\n<td>What variation is acceptable for this function?<\/td>\n<td>Tolerance needs an agreed basis and inspection context<\/td>\n<\/tr>\n<tr>\n<td>Surface\/delivery condition<\/td>\n<td>What surface state is being quoted?<\/td>\n<td>Stock condition can affect later operations and appearance<\/td>\n<\/tr>\n<tr>\n<td>Finished geometry<\/td>\n<td>What bends, holes, welds or formed features matter?<\/td>\n<td>Flat stock is an input, not the finished part<\/td>\n<\/tr>\n<tr>\n<td>Drawing revision<\/td>\n<td>Which version controls the order?<\/td>\n<td>Prevents quotation and sample drift across changes<\/td>\n<\/tr>\n<tr>\n<td>Evidence\/acceptance<\/td>\n<td>What records or checks are expected?<\/td>\n<td>Avoids assuming undocumented proof or certification<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>A buyer should distinguish nominal thickness from tolerance and from a measurement taken on a finished part after later processes. If a dimension is critical, the design authority should define where and how it is evaluated. The article does not establish a universal tolerance or measurement method. Those choices depend on the project specification, material and function.<\/p>\n<p>The material record and the physical measurement answer related but different questions. A supplier\u2019s label can tell purchasing how stock is grouped; a measurement can indicate a dimension at a particular location; a material document, when agreed and supplied, may identify the declared material or lot. None of these alone establishes every aspect of the finished part. Buyers should state which records they require and which characteristics are acceptance criteria. Do not assume that a product name includes a test certificate, a particular origin, a specific mill condition or a guarantee of performance. If such evidence is important, write it into the purchase requirement and agree how it will be reviewed.<\/p>\n<p>Location can matter when the part geometry makes thickness relevant in more than one way. The flat blank may be measured before forming, while the final component includes bends, joints, coatings or assembled interfaces. A buyer should clarify whether the requirement applies to the incoming stock, a finished surface, or a defined feature on the completed part. This is especially useful when comparing a prototype with a production quotation: the same stock description can coexist with different dimensions, revisions or process assumptions.<\/p>\n<p>If the supplier uses a stock designation that differs from the drawing, ask for the exact proposed material and dimensions in writing. The response should make clear whether the supplier is quoting the specified form, a commercially equivalent product, or a proposed substitute. A substitute should be assessed and approved by the responsible technical owner before it becomes the order basis. An informal note such as \u201csame as plate\u201d is not a controlled equivalence decision.<\/p>\n<h2>Does the sheet or plate label determine strength or suitability?<\/h2>\n<p>No. A thicker stock designation does not by itself establish that a finished component is stronger, safer or better for the application. Mechanical behavior depends on the selected material and condition, actual geometry, loading direction, forming and joining details, and how the component is supported and assembled. Thickness can be one design variable, but it does not replace engineering evaluation.<\/p>\n<p>Likewise, a sheet label does not mean a part is automatically flexible, weak or unsuitable. A thin formed component may be designed for a particular purpose; a thicker plate may be unnecessary or create different design and manufacturing considerations. No comparison of generic labels can determine the performance of a specific towel-rack bracket, shower-caddy support or storage-rack component without its requirements and construction.<\/p>\n<p>The same caution applies to cost, weight, formability and corrosion. A catalog may describe typical commercial tendencies, but those statements should not be applied as a guarantee about a particular alloy, thickness, finish or finished assembly. Buyers should compare the exact material and product scope, not assume the stock-form word supplies a price or performance ranking.<\/p>\n<p>For a product developer, the right question is: which combination of material, thickness, geometry, process and acceptance evidence satisfies the approved design? If the current drawing is too early to answer that, identify assumptions and request supplier feedback. That feedback can inform a design discussion but does not replace the buyer\u2019s design authority or a verified specification.<\/p>\n<h2>How does stock form relate to a finished hardware component?<\/h2>\n<p>Flat stock is only one input to the final product. A bathroom accessory or home-storage component may involve cutting, holes, bends, welds, surface finishing, assembly and packaging. The sequence and design can affect which stock form is practical, but the correct route is project-specific. This article does not claim that a particular thickness or stock product is available from Koitor or that one form is always easier to manufacture.<\/p>\n<p>A hypothetical mounting component illustrates the distinction. The design team may specify a flat blank with a particular thickness and material, then add a bend and mounting openings. A buyer reviewing the finished component should confirm those features in the drawing and sample as well as the original stock description. The finished bend, hole position, edge condition and surface appearance are not automatically proven by a supplier calling the starting stock \u201csheet.\u201d<\/p>\n<p>Similarly, a buyer may compare two supplier quotations where one says \u201csheet\u201d and another says \u201cplate.\u201d First normalize the actual material designation, thickness, tolerance, surface state and finished-part scope. Then review whether both quotations satisfy the drawing and approved design. If one quote leaves a field blank, record it as an open clarification instead of assuming the supplier uses the buyer\u2019s convention.<\/p>\n<p>A change from one stock category to another may affect tooling, forming, joining, weight, packing or other design considerations. These are questions for project review, not universal outcomes. A supplier can explain its proposal within verified capability; engineering should determine whether the alternate is acceptable. Any approved substitution should be reflected in the controlled documents and sample or inspection criteria.<br \/>\nThe buyer should also check that related references remain aligned after the change: product drawings, BOM entries, supplier quote, sample label, inspection plan and purchase order may each use a stock term. A revision note should identify what changed and which version now governs, rather than relying on an email subject or a verbal agreement. Where the supplier\u2019s naming convention is retained as an internal description, keep the actual dimensional and material fields visible beside it. This makes the record understandable to procurement, engineering, quality and receiving teams even when they use different catalog language. The aim is not to add paperwork for its own sake; it is to preserve one shared understanding of what was bought and what should be checked when it arrives.<\/p>\n<figure class=\"wp-block-image size-large koitor-blog-image\" style=\"margin:32px 0;\">\n<img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-process-sheet-stock-thickness-process.webp\" alt=\"Metal stock thickness checked against a drawing during material review\" style=\"width:100%;height:auto;border-radius:8px;max-width:960px;display:block;margin:0 auto\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-process-sheet-stock-thickness-process-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-process-sheet-stock-thickness-process-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-process-sheet-stock-thickness-process-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-process-sheet-stock-thickness-process-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-process-sheet-stock-thickness-process-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-process-sheet-stock-thickness-process.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><figcaption style=\"font-size:0.9em;color:#666;margin-top:8px;\">A stock label should be checked against the actual material and dimension fields on the project drawing.<\/figcaption><\/figure>\n<h2>How buyers should specify sheet and plate stock<\/h2>\n<h3>What should buyers compare in supplier quotations?<\/h3>\n<p>A quote comparison should normalize terms before comparing price or lead-time assumptions. One supplier may name a stock category one way and another supplier may use a different convention. Ask both to state the actual material, thickness, units, tolerance basis, supplied surface condition and any proposed substitution. Compare the finished component scope and included operations separately from raw stock wording.<\/p>\n<p>Useful clarification prompts include:<\/p>\n<ul>\n<li>Which material grade or designation is included in the quote?<\/li>\n<li>What nominal thickness and unit are quoted, and what tolerance applies?<\/li>\n<li>What surface or delivery condition will the stock have?<\/li>\n<li>Is the quoted stock the specified material or an alternate proposal?<\/li>\n<li>Which drawing revision and part number are used to prepare the quote?<\/li>\n<li>Are cutting, forming, joining, finish and assembly included in the stated scope?<\/li>\n<li>What inspection or material documentation is included, if any?<\/li>\n<li>Which assumptions must the buyer approve before sampling or production?<\/li>\n<\/ul>\n<p>The answers help purchasing distinguish a real technical difference from a vocabulary difference. They also reduce the chance that a lower price simply reflects a different material condition, an omitted operation or an unapproved substitution. No fixed price result follows from the word plate or sheet alone.<\/p>\n<p>A short comparison table attached to the RFQ can record each bidder\u2019s response side by side. Include the exact quoted grade, nominal thickness, tolerance, surface condition, processing scope, documentation and exceptions. If an answer is \u201cstandard,\u201d ask the supplier to identify which standard or catalog definition applies. If a field is not included, mark it as excluded or pending instead of filling it in from a previous order. This keeps procurement\u2019s comparison focused on the actual purchased configuration and makes a later change easier to trace.<\/p>\n<p>When the quotation concerns formed or cut flat blanks, see the related Koitor page on cut-to-size metal blanks and supply scope. For surface condition questions, the separate article on hot-rolled pickled and oiled versus cold-rolled steel surfaces addresses that distinct comparison. Keep this article focused on stock naming versus actual specification.<\/p>\n<h3>What mistakes should importers avoid?<\/h3>\n<ul>\n<li><strong>Treating one supplier\u2019s cutoff as universal.<\/strong> Catalog conventions can differ, especially near a boundary; confirm the governing specification and dimensions.<\/li>\n<li><strong>Ordering by form label alone.<\/strong> \u201cSheet\u201d or \u201cplate\u201d does not identify a complete material, thickness or tolerance.<\/li>\n<li><strong>Using gauge as a material-neutral thickness.<\/strong> Gauge mappings may depend on the material system and source; verify actual decimal or metric thickness in the controlled requirement.<\/li>\n<li><strong>Assuming plate guarantees strength.<\/strong> Finished performance depends on the design and material, not only a stock category.<\/li>\n<li><strong>Assuming sheet guarantees easier forming.<\/strong> A specific part\u2019s material, geometry and process determine feasibility.<\/li>\n<li><strong>Ignoring surface or delivery condition.<\/strong> A stock label does not define the surface state or subsequent finishing scope.<\/li>\n<li><strong>Comparing quotations before normalizing scope.<\/strong> Different labels may hide different thicknesses, grades or included operations.<\/li>\n<li><strong>Approving substitutions verbally.<\/strong> A change must be reviewed by the responsible technical owner and recorded.<\/li>\n<li><strong>Treating the raw stock as the finished product.<\/strong> Forming, holes, welds, finish and assembly still need their own requirements and inspection basis.<\/li>\n<li><strong>Leaving revisions inconsistent.<\/strong> The RFQ, quotation, sample, BOM and purchase order should identify the same controlled configuration.<\/li>\n<\/ul>\n<p>These checks are practical safeguards, not evidence that any particular supplier is likely to make an error. A clear question and written response make the basis of the transaction auditable for both sides.<\/p>\n<h3>What checklist should an RFQ use for flat metal stock?<\/h3>\n<p>Use this checklist to replace an ambiguous stock label with project information. Mark fields that do not apply and explicitly list unresolved decisions.<\/p>\n<ul>\n<li>[ ] Part number and drawing revision are identified.<\/li>\n<li>[ ] The material grade or designation is stated or assigned to an open approval item.<\/li>\n<li>[ ] Actual thickness and units are specified.<\/li>\n<li>[ ] The applicable tolerance and measurement basis are clear for functional dimensions.<\/li>\n<li>[ ] Surface, finish, protective film or supplied condition is stated where relevant.<\/li>\n<li>[ ] The sheet\/plate term is identified as a supplier convention or governing product designation.<\/li>\n<li>[ ] The supplier states any alternate material or stock-form proposal in writing.<\/li>\n<li>[ ] The finished component geometry and included operations are in the quoted scope.<\/li>\n<li>[ ] Sample review and acceptance refer to the same controlled version.<\/li>\n<li>[ ] Required documentation and inspection evidence are agreed rather than assumed.<\/li>\n<li>[ ] Any substitution receives technical approval before order release.<\/li>\n<\/ul>\n<figure class=\"wp-block-image size-large koitor-blog-image\" style=\"margin:32px 0;\">\n<img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-checklist-stock-description-buyer-review-checklist.webp\" alt=\"Buyer checklist for confirming material, thickness, tolerance and drawing details\" style=\"width:100%;height:auto;border-radius:8px;max-width:960px;display:block;margin:0 auto\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-checklist-stock-description-buyer-review-checklist-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-checklist-stock-description-buyer-review-checklist-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-checklist-stock-description-buyer-review-checklist-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-checklist-stock-description-buyer-review-checklist-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-checklist-stock-description-buyer-review-checklist-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1781-checklist-stock-description-buyer-review-checklist.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><figcaption style=\"font-size:0.9em;color:#666;margin-top:8px;\">Record the actual material and dimensional requirement alongside any supplier stock-form label.<\/figcaption><\/figure>\n<h2>Frequently asked questions<\/h2>\n<h3>Is plate always thicker than sheet?<\/h3>\n<p>Plate is generally used for thicker flat stock, but the dividing convention can vary by product specification, material, supplier and market. Do not rely on a single online boundary for every purchase. Confirm the actual thickness, material and governing description for the product being quoted.<\/p>\n<h3>Does sheet metal vs plate have one universal thickness cutoff?<\/h3>\n<p>This article does not apply a universal cutoff. Individual suppliers and specifications may use defined boundaries, but those must be interpreted within their stated scope. For a project, the actual material specification and dimension requirements control.<\/p>\n<h3>Is gauge enough to specify sheet thickness?<\/h3>\n<p>Not by itself unless the relevant material gauge system and source are clear. Include the actual thickness in a stated unit and use the applicable tolerance requirement. See the dedicated gauge-versus-thickness guide for that narrower topic.<\/p>\n<h3>Does plate automatically make a bathroom bracket stronger?<\/h3>\n<p>No. The finished component\u2019s material, geometry, support, joints, loading and use conditions all matter. A stock label alone does not establish product performance or suitability. The design authority must approve the actual part requirement.<\/p>\n<h3>Can two suppliers quote the same material using different terms?<\/h3>\n<p>They may use different catalog conventions, but the buyer must still compare the actual material, thickness, tolerance, surface state and finished scope. Ask each supplier to explain its terminology and document the quoted basis before selecting an offer.<\/p>\n<h3>What should I do if the quotation says plate but the drawing says sheet?<\/h3>\n<p>Do not assume the quote is compliant or noncompliant from those words alone. Compare the actual material and dimension fields, ask the supplier which specification and stock are included, then have the responsible technical owner confirm whether the proposal meets the drawing.<\/p>\n<h2>Work With Koitor Hardware<\/h2>\n<p>For a bathroom or home-storage hardware project, share the current drawing or sample, material requirement, actual thickness and unresolved stock description. Koitor Hardware is a family-owned custom metal hardware factory; the applicable project scope and confirmed capability should be reviewed for each order. A clear specification helps align quotation, sample approval and production documentation.<br \/>\nIf the project team is still deciding between alternatives, separate the design question from the supplier\u2019s stock vocabulary: list the functional requirement, compare proposed material and dimensions, and document who approves the final choice. The label can then remain a convenient purchasing shorthand without being mistaken for the engineering decision itself.<\/p>\n<section class=\"koitor-blog-cta\" style=\"margin:36px 0;padding:28px;border:1px solid #E8E8E8;border-radius:12px;background:#FAFAFA;\">\n<p style=\"margin:0 0 18px;font-size:1.1em;font-weight:600;color:#222;\">Clarify material and thickness requirements for a hardware project.<\/p>\n<p><a href=\"https:\/\/koitorhardware.com\/contact\/\" style=\"display:inline-flex;align-items:center;justify-content:center;min-height:48px;padding:0 22px;border-radius:8px;background:#FF5A1F;color:#ffffff;font-weight:700;text-decoration:none;line-height:1;margin-right:10px;\">Discuss Your Project<\/a><br \/>\n<a href=\"https:\/\/koitorhardware.com\/custom-bathroom-hardware-manufacturer\/\" style=\"display:inline-flex;align-items:center;justify-content:center;min-height:48px;padding:0 22px;border-radius:8px;border:1px solid #FF5A1F;color:#FF5A1F;background:#ffffff;font-weight:700;text-decoration:none;line-height:1;\">Review Bathroom Hardware Scope<\/a><\/p>\n<div class=\"koitor-article-tags\" style=\"margin-top:24px;padding-top:18px;border-top:1px solid #E5E7EB;display:flex;align-items:center;gap:8px;flex-wrap:wrap;\">\n<span style=\"font-size:14px;font-weight:700;color:#344054;margin-right:4px;\">Tags:<\/span><br \/>\n<span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Material Selection<\/span><br \/>\n<span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Hardware Specifications<\/span><br \/>\n<span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Importer Buying Guide<\/span>\n<\/div>\n<\/section>\n","protected":false},"excerpt":{"rendered":"<p>Sheet metal vs plate is usually a comparison of flat metal product descriptions, with plate generally referring to thicker stock, but the naming boundary depends on the material, supplier and applicable specification. A generic cutoff quoted online should not replace the actual project requirement. For a hardware buyer, the reliable purchasing description states the material [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":9209,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[145],"tags":[428,40,91],"class_list":["post-9212","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-hardware-sourcing-knowledge","tag-hardware-specifications","tag-importer-buying-guide","tag-material-selection"],"_links":{"self":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts\/9212","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/comments?post=9212"}],"version-history":[{"count":1,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts\/9212\/revisions"}],"predecessor-version":[{"id":9229,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts\/9212\/revisions\/9229"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/media\/9209"}],"wp:attachment":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/media?parent=9212"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/categories?post=9212"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/tags?post=9212"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}