{"id":9689,"date":"2026-11-22T09:01:01","date_gmt":"2026-11-22T09:01:01","guid":{"rendered":"https:\/\/koitorhardware.com\/?p=9689"},"modified":"2026-11-22T09:01:01","modified_gmt":"2026-11-22T09:01:01","slug":"mdf-vs-particle-board","status":"publish","type":"post","link":"https:\/\/koitorhardware.com\/de\/mdf-vs-particle-board\/","title":{"rendered":"MDF vs Particle Board: Identify the Core Before Specifying the Assembly"},"content":{"rendered":"<p>MDF vs particle board is best compared by identifying the panel core, its surface system, the cut edge and the intended attachment. Medium-density fibreboard (MDF) is made from refined wood fibres combined with resin and formed into a panel; particleboard is made from wood particles bonded into a panel. Those broad process descriptions distinguish the core, but do not tell a buyer which panel is universally stronger, more moisture resistant, easier to machine or better for every storage product. Grade, thickness, density profile, resin system, surface finish and application all matter.<\/p>\n<p>For a metal-and-board storage product, the panel is only one part of the assembly. A bracket, hanger, edge trim, basket or fastener interfaces with the panel through specified dimensions and attachment details. A panel name alone does not establish that an attachment will hold or that an edge treatment fits. Buyers should identify the exact panel specification, finish, thickness, edge condition, hardware interface and project requirement before approving a sample.<\/p>\n<p>This guide explains the core distinction and provides a buyer\u2019s checklist. It does not claim Koitor manufactures MDF or particleboard, assign a structural rating, or provide a universal moisture or fastening recommendation. Confirm the exact panel product and connection with the responsible material supplier and design authority.<\/p>\n<h2>What MDF means<\/h2>\n<p>MDF is a wood-based panel made from refined fibres bonded with resin and pressed into a board. A producer\u2019s environmental product declaration describes its own manufacturing process, which may include refining material into fibres, blending with resin and pressing the panel. That source supports the bounded identity of MDF; it does not establish the composition or environmental impacts of every MDF grade.<\/p>\n<p>MDF commonly has a relatively uniform-looking core compared with particleboard\u2019s visible particles, but appearance varies by product, grade and cut. Surface layers, paint, laminate, melamine paper or veneer can hide the core. A buyer should inspect a specified edge or request the manufacturer\u2019s technical sheet rather than infer the panel type from the decorative surface.<\/p>\n<p>The term \u201cmedium density\u201d is part of the product category, not a complete grade specification. Density, thickness, moisture-related properties, emission class, surface quality and machining characteristics depend on the actual product and applicable standard or grade. Do not use the category name as a substitute for the panel supplier\u2019s current data.<\/p>\n<h2>What particle board means<\/h2>\n<p>Particleboard is produced from wood particles bonded together to form a panel. Particle size, layer arrangement, resin and pressing conditions can vary. The European Panel Federation\u2019s overview describes particleboard as a panel category; a particular supplier\u2019s product sheet remains necessary to establish the exact composition, grade and performance characteristics of a panel being purchased.<\/p>\n<p>An exposed cut edge may show particles rather than the more fibre-like appearance associated with MDF. That visual clue is useful for preliminary identification only; it is not a material verification method for a concealed or coated panel. A faced surface may cover the core, and different panel constructions may need supplier documentation.<\/p>\n<p>Particleboard grades and surface treatments differ. Buyers should not assume that every particleboard has the same screw-holding, edge strength, moisture behavior or finishing potential. Those are product-specific properties and must be checked against a current grade specification and the intended use. If a panel is used near a bathroom environment, confirm the panel supplier\u2019s stated limitations and project requirements; do not infer waterproofing from the panel family.<\/p>\n<h2>MDF vs particle board: compare the core and the assembly<\/h2>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Buyer dimension<\/th>\n<th>MDF<\/th>\n<th>Particleboard<\/th>\n<th>Was ist zu \u00fcberpr\u00fcfen?<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Core description<\/td>\n<td>Refined fibres bonded into a panel<\/td>\n<td>Wood particles bonded into a panel<\/td>\n<td>Exact grade and manufacturer data<\/td>\n<\/tr>\n<tr>\n<td>Visible edge<\/td>\n<td>Often fibre-like, depending on product and cut<\/td>\n<td>May show particles or layers, depending on product<\/td>\n<td>Approved sample and edge specification<\/td>\n<\/tr>\n<tr>\n<td>Surface<\/td>\n<td>Can be bare or faced with a finish layer<\/td>\n<td>Can also be faced or coated<\/td>\n<td>Surface material, color, texture and revision<\/td>\n<\/tr>\n<tr>\n<td>Thickness and dimensions<\/td>\n<td>Product-specific<\/td>\n<td>Product-specific<\/td>\n<td>Tolerance, measurement points and drawing<\/td>\n<\/tr>\n<tr>\n<td>Hardware attachment<\/td>\n<td>Depends on panel and interface design<\/td>\n<td>Depends on panel and interface design<\/td>\n<td>Fastener, bracket, edge distance and approved design<\/td>\n<\/tr>\n<tr>\n<td>Environment<\/td>\n<td>Must be verified for the actual grade and setting<\/td>\n<td>Must be verified for the actual grade and setting<\/td>\n<td>Supplier limitations and project requirements<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>The table deliberately avoids universal performance rankings. A higher or lower density, a thicker board or a particular panel family does not alone determine suitability for the complete product. A metal bracket, screw or trim detail interacts with the panel edge and surface. The assembly should be specified as a system.<\/p>\n<p>A buyer can inspect a representative cut edge, but appearance alone may not authenticate the panel grade. Request the panel supplier\u2019s identification, product data and sample approval. Record whether the core is visible, faced or sealed, and identify which surface is considered the cosmetic face.<\/p>\n<h2>Separate core, face and edge specification<\/h2>\n<p>The panel core is different from its decorative or protective surface. Melamine-faced board, laminate, veneer, paint or foil can be applied to different substrates. A \u201cmelamine\u201d surface label does not prove that the core is MDF or particleboard. Keep the panel substrate, surface layer, adhesive or bond line if specified, color and texture as separate fields.<\/p>\n<p>The cut edge deserves its own specification. It may be exposed, painted, sealed, covered with edge banding or concealed by hardware. Edge treatment can change the thickness at the attachment zone and influence how a bracket or clip fits. If an edge trim is used, record its grip range and the panel thickness at the actual location. The live <a href=\"https:\/\/koitorhardware.com\/de\/edge-trim-grip-range-panel-thickness-selection\/\">edge-trim grip range and panel thickness guide<\/a> addresses that interface question.<\/p>\n<p>Hole and attachment details also matter. Identify hole position, diameter, distance to the edge, fastener type, insert or bracket, and assembly revision when these affect the design. Do not copy a fastener recommendation from a different board grade or thickness without confirmation. The panel manufacturer\u2019s data, product designer\u2019s requirement and approved sample together establish the applicable scope.<\/p>\n<figure class=\"wp-block-image size-large koitor-blog-image\" style=\"margin:32px 0;\"><img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-process-delivery.webp\" alt=\"Cut edges of two panel cores are compared with a plain metal bracket.\" style=\"width:100%;max-width:960px;height:auto;display:block;margin:0 auto;border-radius:10px;\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-process-delivery-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-process-delivery-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-process-delivery-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-process-delivery-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-process-delivery-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-process-delivery.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><figcaption style=\"font-size:14px;color:#667085;text-align:center;margin-top:8px;\">The panel core and the hardware attachment interface are distinct specification layers.<\/figcaption><\/figure>\n<h2>How to qualify a panel in a metal storage product<\/h2>\n<p>Start with the intended product and use environment. Is the panel a shelf, cabinet side, decorative insert, backing or another component? Does it carry a defined function, conceal hardware, support a fitting or simply provide a surface? The product designer should state the purpose and critical requirements. This article does not provide a load-bearing design or bathroom exposure rating.<\/p>\n<p>Then identify the exact material from the supplier. Record the manufacturer, trade or grade name, thickness, dimensions, surface and revision. If a certificate or technical sheet is required, obtain the current document and confirm that the supplied panel is covered. A generic MDF or particleboard description is not enough when the order depends on a particular property.<\/p>\n<p>Review samples in the assembly, not only as loose coupons. Check the panel edge, surface appearance, thickness at mounting points, hole alignment, trim engagement and how metal parts meet the board. A sample may demonstrate fit and finish, but it does not prove all material performance. Mark the sample revision and note any open conditions before using it as a production reference.<\/p>\n<p>For products combining wire basketry and panels, distinguish the metal item supplier\u2019s scope from the panel source. A metal hardware factory may prepare the metal component or coordinate a bought-in panel according to approved project facts; this article does not claim panel production. Buyers sourcing custom storage baskets can review the relevant <a href=\"https:\/\/koitorhardware.com\/de\/custom-metal-storage-basket-manufacturer\/\">metal storage basket manufacturer page<\/a> and confirm the actual project scope.<\/p>\n<h2>Common mistakes in an MDF and particleboard comparison<\/h2>\n<p><strong>Judging the core from the face.<\/strong> A melamine or laminate surface may cover different substrates. Confirm the core from documentation or an approved edge sample.<\/p>\n<p><strong>Assuming MDF is always stronger or smoother.<\/strong> A broad product-family label does not establish a property across all grades and constructions. Compare exact product data for the buyer\u2019s requirement.<\/p>\n<p><strong>Assuming particleboard is always unsuitable for hardware.<\/strong> Suitability depends on grade, geometry, attachment, environment and design. A blanket rejection or approval is unsupported.<\/p>\n<p><strong>Using thickness as the only specification.<\/strong> Thickness does not identify core, tolerance, surface, edge treatment, density profile or attachment design.<\/p>\n<p><strong>Treating edge appearance as a lab test.<\/strong> A cut edge can help identify a sample visually, but does not verify hidden composition or certification.<\/p>\n<p><strong>Assuming a faced panel core from the finish name.<\/strong> Surface and substrate are separate. Record them independently.<\/p>\n<p><strong>Approving a hardware bracket without checking the panel interface.<\/strong> Hole position, edge distance, thickness and attachment design can matter. Review the actual drawing and sample.<\/p>\n<p><strong>Transferring environmental claims between grades.<\/strong> Moisture or emissions statements must refer to the actual product, grade, method and applicable conditions.<\/p>\n<h2>Prepare a panel and hardware record<\/h2>\n<p>A useful purchase or sample record can include:<\/p>\n<ol>\n<li>Panel manufacturer and exact grade.<\/li>\n<li>Core type and thickness.<\/li>\n<li>Panel dimensions and applicable tolerance.<\/li>\n<li>Surface layer, color and finish revision.<\/li>\n<li>Cut-edge treatment and visible edges.<\/li>\n<li>Hole and attachment details.<\/li>\n<li>Metal bracket, trim or basket interface.<\/li>\n<li>Intended product function and use environment.<\/li>\n<li>Current technical documentation and evidence required.<\/li>\n<li>Sample ID, drawing revision and approval status.<\/li>\n<\/ol>\n<p>If a field is not defined, identify it as open. Do not fill it with assumptions from a supplier\u2019s casual description. A revision change in surface, core, thickness or edge treatment may require review of fit, color or attachment. The responsible buyer and designer decide what needs to be reassessed.<\/p>\n<p>When the panel is purchased from a separate supplier, agree how substitutions are controlled. A new panel may use a different core or face under a similar trade label. Ask for the current grade and a written change notice where the buyer\u2019s contract requires it. Keep the metal hardware and panel revisions linked in the bill of materials or sample record.<\/p>\n<h3>Which is better, MDF or particle board?<\/h3>\n<p>There is no universal winner. Compare exact panel grades, surfaces, thickness, attachment details and project requirements.<\/p>\n<h3>Can a decorative melamine face identify the panel core?<\/h3>\n<p>No. The surface layer and substrate are separate attributes. Verify the core from the product specification or sample.<\/p>\n<h3>Does MDF resist bathroom moisture better?<\/h3>\n<p>Do not assume that from the family name. Check the actual grade, edge and surface system, manufacturer limitations and intended environment.<\/p>\n<h3>Can a screw be used in either panel?<\/h3>\n<p>The suitability depends on exact fastener, panel grade, thickness, edge position and connection design. Follow approved product documentation rather than a generic rule.<\/p>\n<h3>Does a thicker panel automatically improve attachment?<\/h3>\n<p>Not necessarily. Thickness is one design input. Attachment geometry and the specified panel properties also matter.<\/p>\n<h3>What should be checked on a sample?<\/h3>\n<p>Confirm panel identity, thickness, surface, edge treatment, holes, hardware fit and revision. Use the applicable project criteria for acceptance.<\/p>\n<h3>Read the panel grade and product documentation as a unit<\/h3>\n<p>A panel-family name is a category description, not a complete order specification. A buyer should obtain the exact commercial grade, thickness, size, surface and applicable technical data from the panel producer or authorized distributor. The document should identify the product to which it applies and its date or revision. If a specification cites a standard, verify the named edition and jurisdiction rather than assuming a page from an older catalog remains current.<\/p>\n<p>Check that the supplied lot can be traced to the approved product and source. The buyer\u2019s required records may include an order reference, grade, panel dimensions, lot or batch identification and any declarations required by the project. Do not claim a document establishes properties that it does not state. An environmental declaration, for example, may describe a producer\u2019s product system and life-cycle scope; it is not automatically a mechanical performance rating or proof that a random panel belongs to that product.<\/p>\n<p>If a supplier uses an alternative trade name, ask how it maps to the approved grade and what has changed. A similar label may refer to a different surface or core. Compare the actual technical sheet, sample edge and order documentation. If a meaningful field cannot be confirmed, keep the item open instead of substituting a generic MDF or particleboard description.<\/p>\n<h3>Assess edges and attachment areas separately<\/h3>\n<p>The panel\u2019s broad face and its edge can behave differently in a finished design because the construction and finishing at those locations differ. The core may be exposed at a cut edge, covered by an edge band, sealed with a coating or hidden behind metal trim. Identify which condition applies to the production part. A sample that shows a wrapped face but not its edge may not answer whether a bracket, trim or fastener can be fitted as intended.<\/p>\n<p>Attachment details need dimensions and a reference. If a metal component is clipped over an edge, the grip range and actual panel thickness matter. If a bracket is screwed to a face or edge, hole placement, receiver design, fastener and assembly access should be defined by the product designer. This guide does not state that one panel core accepts a particular screw or clip better than another. Obtain the specific panel and hardware documentation, then review the approved interface.<\/p>\n<p>Edge protection and appearance may also be part of a buyer\u2019s acceptance. Record the edge material, color, finish, joint position and visible side if these affect the product. If the surface is printed or textured, confirm whether the sample and production panel use the same approved design. Do not infer that identical surface names guarantee identical color or texture across suppliers or lots; use the project\u2019s sample and color approval process.<\/p>\n<h3>Review the sample in the final assembly orientation<\/h3>\n<p>A loose panel coupon can show its edge and surface, but it cannot show every interaction with the metal hardware. Place the approved panel sample into the intended assembly where practical. Check alignment, exposed edges, clearances, hardware seating, appearance and the interfaces that the drawing identifies. If a particular dimension or function is critical, measure it using the agreed method rather than relying only on a photograph.<\/p>\n<p>Record what the sample proves and what remains untested. A successful fit check does not authenticate the panel chemistry, prove long-term moisture behavior or establish structural capacity. Likewise, a panel certificate does not prove that a bracket\u2019s mounting geometry is correct. Each piece of evidence answers a defined question; keep the test scope attached to the evidence.<\/p>\n<p>The sample should have a clear identity: project, SKU, panel grade if known, surface revision, thickness, drawing revision, date and approval state. If the sample is a visual reference only, label it that way. If it is intended to approve dimensions and appearance, make those acceptance points explicit. Avoid an ambiguous \u201csample approved\u201d status that could be misread as approval of material, environmental performance and production process all at once.<\/p>\n<h3>Consider changes to the panel as controlled changes<\/h3>\n<p>A panel substitution can be proposed to address availability, cost or finish. Before accepting it, compare the old and new product at the level relevant to the buyer\u2019s design: core type, grade, thickness, density or other stated data, surface, edge treatment, dimensions and supplier. Check whether the new panel affects trim fit, hole locations, fasteners, appearance, assembly sequence, packaging or the intended environment. The exact review scope depends on the change and project requirement.<\/p>\n<p>Do not assume a different core is a drop-in replacement because the outside dimensions match. Conversely, do not demand a full product redesign when a documented change leaves the critical requirements unaffected. Ask the responsible designer and buyer to assess the actual change, record their decision and update only the documents that the approved process requires. The change record should point to the new grade and sample, and note any fields that remain unchanged.<\/p>\n<p>If panel production or finishing is performed by another company, the contractual supplier should identify which party controls the delivered panel and communicates revisions. A sourcing team can use the <a href=\"https:\/\/koitorhardware.com\/de\/custom-metal-storage-basket-manufacturer\/\">custom metal storage basket manufacturer page<\/a> to understand Koitor\u2019s relevant metal-product scope, while confirming the actual bought-in panel source and responsibility for each project. Do not imply that the metal hardware manufacturer makes the panel unless the approved company facts say so.<\/p>\n<h3>Avoid broad environmental or safety conclusions<\/h3>\n<p>Panel category names do not automatically establish formaldehyde emissions classification, recyclability, moisture resistance, fire behavior or regulatory compliance. Those subjects depend on the specific product, market, standard and current supplier evidence. If an importing program requires such evidence, state the jurisdiction, exact product, document type and accepted testing or declaration route. Have the responsible compliance reviewer confirm applicability.<\/p>\n<p>An environmental product declaration can be useful within its stated system boundary and assumptions. It should not be read as proof that every panel from a product family has the same environmental profile, nor as a substitute for a buyer\u2019s specific regulatory or sustainability documentation. Similarly, a surface coating or seal does not make a core waterproof unless that claim is supported for the actual panel system and use conditions.<\/p>\n<p>The material comparison here remains deliberately narrow: fibre-based versus particle-based core descriptions and the buyer records needed to specify the assembly. If a project decision depends on a property beyond that scope, request the exact grade data and a current source before turning the property into a purchase requirement.<\/p>\n<h2>Specify the panel as part of the product system<\/h2>\n<p>MDF vs particle board distinguishes broad core constructions, but the panel core alone does not define the finished assembly. Specify the actual grade, thickness, face, edge and attachment; then review the approved sample with the metal hardware and relevant product criteria. Use current supplier data for any property claim, and keep open facts marked as pending.<\/p>\n<p>Koitor\u2019s confirmed OEM manufacturing scope is described on the <a href=\"https:\/\/koitorhardware.com\/de\/oem-home-storage-hardware-manufacturer\/\">home-storage hardware manufacturer page<\/a>. For a custom storage project, share the controlled drawing or sample and panel-interface requirement through <a href=\"https:\/\/koitorhardware.com\/de\/kontakt\/\">Koitor\u2019s contact page<\/a>.<\/p>\n<figure class=\"wp-block-image size-large koitor-blog-image\" style=\"margin:32px 0;\"><img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-checklist-delivery.webp\" alt=\"A buyer examines panel samples and a fastener beside an unmarked checklist.\" style=\"width:100%;max-width:960px;height:auto;display:block;margin:0 auto;border-radius:10px;\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-checklist-delivery-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-checklist-delivery-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-checklist-delivery-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-checklist-delivery-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-checklist-delivery-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1888-checklist-delivery.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><figcaption style=\"font-size:14px;color:#667085;text-align:center;margin-top:8px;\">Record core, surface, edge, attachment and revision separately.<\/figcaption><\/figure>\n<section class=\"koitor-blog-cta\" style=\"margin:32px 0;padding:26px;background:#FFF8F4;border:1px solid #F4D7C9;border-radius:10px\">\n<h3>Review a Panel and Hardware Interface<\/h3>\n<p>Share the controlled drawing or sample, panel specification and the exact edge or attachment question for project review.<\/p>\n<div style=\"display:flex;gap:12px;flex-wrap:wrap\"><a href=\"https:\/\/koitorhardware.com\/de\/kontakt\/\" style=\"display:inline-flex;align-items:center;justify-content:center;padding:13px 20px;border-radius:6px;text-decoration:none;font-weight:700;background:#FF5A1F;color:#ffffff\">Kontaktieren Sie Koitor<\/a><a href=\"https:\/\/koitorhardware.com\/de\/oem-home-storage-hardware-manufacturer\/\" style=\"display:inline-flex;align-items:center;justify-content:center;padding:12px 20px;border:1px solid #FF5A1F;border-radius:6px;text-decoration:none;font-weight:700;color:#FF5A1F\">Entdecken Sie die OEM-Fertigung<\/a><\/div>\n<div class=\"koitor-article-tags\" style=\"display:flex;gap:8px;flex-wrap:wrap;margin-top:18px\"><span style=\"display:inline-flex;align-items:center;padding:6px 10px;border-radius:999px;background:#FFF3ED;color:#8A3514\">Product Specification<\/span><span style=\"display:inline-flex;align-items:center;padding:6px 10px;border-radius:999px;background:#FFF3ED;color:#8A3514\">Materials &#038; Finishes<\/span><span style=\"display:inline-flex;align-items:center;padding:6px 10px;border-radius:999px;background:#FFF3ED;color:#8A3514\">Metallbeschl\u00e4ge f\u00fcr Aufbewahrungsm\u00f6bel<\/span><\/div>\n<\/section>","protected":false},"excerpt":{"rendered":"<p>Separate panel core, surface finish and metal-hardware attachment fields when comparing MDF and particle board.<\/p>","protected":false},"author":1,"featured_media":9686,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[17],"tags":[413,48,74],"class_list":["post-9689","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-materials-finishes","tag-materials-finishes","tag-metal-storage-hardware","tag-product-specification"],"_links":{"self":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts\/9689","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/comments?post=9689"}],"version-history":[{"count":1,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts\/9689\/revisions"}],"predecessor-version":[{"id":9728,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/posts\/9689\/revisions\/9728"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/media\/9686"}],"wp:attachment":[{"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/media?parent=9689"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/categories?post=9689"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/koitorhardware.com\/de\/wp-json\/wp\/v2\/tags?post=9689"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}