{"id":7300,"date":"2026-11-05T07:08:14","date_gmt":"2026-11-05T07:08:14","guid":{"rendered":"https:\/\/koitorhardware.com\/?p=7300"},"modified":"2026-11-05T07:08:14","modified_gmt":"2026-11-05T07:08:14","slug":"rotary-dryer-ground-sockets-match-the-pole-insert-and-socket-before-ordering-replacements","status":"publish","type":"post","link":"https:\/\/koitorhardware.com\/fr\/rotary-dryer-ground-sockets-match-the-pole-insert-and-socket-before-ordering-replacements\/","title":{"rendered":"Rotary Dryer Ground Socket Pole Compatibility: Match the Insert Before Reordering"},"content":{"rendered":"<p>For importers and replacement-parts managers, <strong>rotary dryer ground socket pole compatibility<\/strong> depends on more than a nominal diameter printed on a carton. A complete replacement decision can involve the original dryer or airer model, the pole reference, an optional insert or spacer, the socket&#8217;s mounting architecture, and a closure cap that belongs to that exact socket family. A part that looks similar may use a different interface or be intended for a different installation method.<\/p>\n<p>This guide is for laundry and home-organization hardware distributors, importers, product managers, and private-label teams building replacement assortments. It helps structure an RFQ and sample review; it is not a ground-installation guide. Product compatibility does not prove that a socket is suitable for a particular soil, surface, weather exposure, installation method, or complete rotary dryer. The responsible manufacturer or qualified project party must provide any applicable instructions and performance evidence. Do not infer safe embedment, wind capacity, load, or corrosion life from an image or a product name. For buyers assessing rotary dryer ground socket pole compatibility, the controlling record is the approved configuration, supporting evidence, and named approval owner.<\/p>\n<h2>Start With the Original Dryer, Pole, and Model Revision<\/h2>\n<p>Begin a spare-part inquiry with the product that the customer already owns. Record its manufacturer, product family, model, and revision or date reference if available. If the identification label is missing, gather photographs of the pole end, socket, cap, and any insert, plus the dimensions the original manufacturer instructs the user or service channel to report. A photograph can help identify a likely family, but it does not establish compatibility on its own.<\/p>\n<p>Ask the buyer or customer to distinguish what is being replaced. The pole may be intact while the ground interface is damaged or missing. The socket may remain in place while its cap or insert is lost. The complete anchor may be unknown because the dryer was acquired second-hand. These are different cases, and they may call for different replacement kits. Do not automatically sell a full system when the need is a cap, or a cap when the customer needs a pole-to-socket interface.<\/p>\n<p>A distributor&#8217;s product file should include:<\/p>\n<ul>\n<li>The original dryer or rotary airer brand and model as supplied by the customer.<\/li>\n<li>A product-family or revision identifier when the maker provides one.<\/li>\n<li>Pole reference and any model-specific interface information from the manufacturer.<\/li>\n<li>Socket or ground-anchor identity, including material and mounting type when documented.<\/li>\n<li>Any separate sleeve, insert, reducer, or spacer, with its own part reference.<\/li>\n<li>Closure cap identity and the socket family it is stated to fit.<\/li>\n<li>Parts included in the offered replacement set and parts explicitly excluded.<\/li>\n<li>The source and date of each compatibility statement.<\/li>\n<li>Any unresolved questions and the party responsible for answering them.<\/li>\n<\/ul>\n<p>This record helps a buyer keep a replacement item tied to evidence. It prevents a catalog listing from becoming a chain of assumptions: a buyer sees a tube, estimates the opening, picks a nearby size, and then treats a generic product description as confirmation. If the original model cannot be identified, mark the result as unknown and route the inquiry to the manufacturer or responsible supplier. Do not present a best guess as an approved match.<\/p>\n<p>A useful decision phrase is \u201ccompatible with the named model according to the named supplier&#8217;s current information.\u201d That wording is narrower and more defensible than \u201cuniversal.\u201d It tells the sales and service teams what was checked and where to find the record. If a model has multiple generations, colors, or configurations, capture the relevant distinction instead of assuming all products in a family use the same pole or anchor.<\/p>\n<h2>Separate Ground-Socket Architectures Before Comparing Parts<\/h2>\n<p>Ground interfaces that all appear to hold a pole can use different architectures. A driven metal ground spike, a screw-in plastic ground peg, and a sleeve intended to be embedded in a concrete setting are not interchangeable descriptions of one universal socket. The way a component enters the ground, stays in place, interfaces with a pole, and closes when unused is part of its identity.<\/p>\n<p>Manufacturer product information illustrates this variation. Brabantia&#8217;s product page describes a galvanised-steel plate spike with a closure cap and a named dryer pairing. Leifheit identifies its model 85607 as a plastic screw-in ground peg and lists particular compatible dryer models, including an exclusion despite a generic diameter association. Brabantia&#8217;s support guidance maps cap variants to its own anchor identification. These are brand- and model-specific statements. They are useful examples of why exact identification matters, but they do not define an industry standard or establish a universal fit.<\/p>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Interface family<\/th>\n<th>What the buyer should identify<\/th>\n<th>What not to infer<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Driven metal spike<\/td>\n<td>Maker and model, stated material, pole interface, supplied cap, and named product pairing<\/td>\n<td>That a listed material proves a corrosion life or that it suits all soil<\/td>\n<\/tr>\n<tr>\n<td>Screw-in ground peg<\/td>\n<td>Exact model, maker&#8217;s compatibility list, installation instructions, pole interface, and any exclusions<\/td>\n<td>That \u201cscrew-in\u201d implies a universal anchorage or weather rating<\/td>\n<\/tr>\n<tr>\n<td>Sleeve intended for concrete setting<\/td>\n<td>Model, intended host construction, pole\/insert relationship, and responsible installation documentation<\/td>\n<td>That a sleeve and a soil spike share the same installation requirements<\/td>\n<\/tr>\n<tr>\n<td>Replacement cap<\/td>\n<td>Socket model or maker-defined identification method and cap interface<\/td>\n<td>That a color or diameter code transfers across brands<\/td>\n<\/tr>\n<tr>\n<td>Separate insert or spacer<\/td>\n<td>Part identity, orientation, and the specific pole\/socket pair it serves<\/td>\n<td>That any generic sleeve with a similar diameter is an acceptable substitute<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>The buyer&#8217;s job is to keep these families separate in the SKU database. If a supplier uses different terminology, ask for a drawing or product sheet and map its term to the supplied component without changing the claimed function. Never combine a plastic model&#8217;s compatibility list with a metal spike&#8217;s material description. Never take one maker&#8217;s cap-color system and apply it to another maker&#8217;s replacement set.<\/p>\n<p>The distinction also matters for return handling. A customer&#8217;s phrase \u201cground socket\u201d may refer to the pole receiver, the part in the earth, a concrete-set sleeve, or a cap. Customer service should ask which visible piece is missing and, when possible, obtain a product label or clear photo. A low-cost replacement can still create a service problem if the wrong architecture is shipped and the customer cannot identify the mismatch until opening the package.<\/p>\n<h2>Establish the Pole-to-Socket Interface With Evidence<\/h2>\n<p>A compatible pole and socket should be tied to a named product configuration and source. If the manufacturer publishes a dimension, record the dimension exactly as stated, its measurement point, the model to which it applies, and the document revision. Do not convert a nominal size into a tolerance or fit rule unless the supplier confirms that interpretation. A generic outside diameter may not describe the full interface if a taper, step, insert, collar, slot, or retention feature is involved.<\/p>\n<p>The K1442 research pack documents a Leifheit product whose indexed details associate it with particular model names and exclude another product despite an apparently similar nominal size. The practical procurement lesson is not to copy that brand&#8217;s numbers; it is to keep each maker&#8217;s compatibility table attached to the exact model and revision. It also shows why a simple diameter search can return nearby products that are not intended to work together.<\/p>\n<p>For an RFQ, request:<\/p>\n<ol>\n<li>The exact pole family and socket\/anchor model covered by the quotation.<\/li>\n<li>A current drawing or maker-issued compatibility document for those exact references.<\/li>\n<li>Any interface dimensions the supplier uses to distinguish variants and how those dimensions are measured.<\/li>\n<li>Whether a separate insert or reducer is required, optional, supplied, or excluded.<\/li>\n<li>The intended assembly sequence and orientation, as documented by the responsible manufacturer.<\/li>\n<li>Any named model exclusions or conditions that limit the stated combination.<\/li>\n<li>A sample set that contains the full proposed combination, not only one visible component.<\/li>\n<li>The approved replacement-part identifier and the evidence supporting it.<\/li>\n<\/ol>\n<p>A sample can help the buyer verify that the listed components are physically present and that the proposed parts can be arranged as shown in the supplier&#8217;s documentation. It is not a substitute for the maker&#8217;s compatibility statement or a test of ground anchorage. Keep those kinds of evidence separate. An observed insertion in a tabletop mock-up does not prove how the component behaves in the ground, under wind, with a loaded dryer, or after repeated exposure.<\/p>\n<p>When dimensions matter to the supplier&#8217;s compatibility decision, ask which party measured them and with which instrument or drawing. If the buyer sends a measurement, record it as customer-provided and identify whether it is approximate or controlled. Do not claim that two products fit because their catalog descriptions use the same nominal number. If a maker explicitly states model exclusions, preserve them in the sales record and order logic.<\/p>\n<p>The buyer should also consider whether the pole is sold as a replacement part by itself or belongs to a complete airer model. A part can be mechanically similar but differ in retention details, height, accessory interface, or manufacturer approval. The product listing should not imply that a pole from one model is approved for another without documented confirmation.<\/p>\n<figure class=\"wp-block-image size-large koitor-blog-image\"><img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-insert-socket-components.webp\" alt=\"Pole segment, insert sleeve and ground socket arranged separately for interface identification\" style=\"width:100%;max-width:960px;height:auto;display:block;margin:0 auto;\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-insert-socket-components-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-insert-socket-components-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-insert-socket-components-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-insert-socket-components-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-insert-socket-components-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-insert-socket-components.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><\/figure>\n<h2>Treat Inserts and Spacers as Identified Components<\/h2>\n<p>An insert can be a critical component in the interface, but its purpose and permitted combinations are maker-specific. It may adapt one named pole to one named socket, center an interface, protect a surface, or serve another documented role. Buyers should avoid guessing which one applies. The article&#8217;s buyer framework treats the insert as a part requiring identity, not as a generic solution to a dimensional mismatch.<\/p>\n<p>If a supplier&#8217;s parts list calls for an insert, ask whether it is supplied with the socket, with the dryer, separately in a replacement kit, or as a service part. Confirm whether it has an orientation or assembly instruction. Capture the insert&#8217;s part number and its approved pole\/socket pair. If it is absent from the customer sample, do not silently substitute one that looks similar. Ask the maker to clarify whether the sample is incomplete or the insert is not part of that model.<\/p>\n<p>A replacement decision table can prevent mix-ups:<\/p>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Original condition<\/th>\n<th>Information to gather<\/th>\n<th>Decision status<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Pole and socket are both available<\/td>\n<td>Maker\/model, visible interface features, supplier pairing, insert identity<\/td>\n<td>Candidate for named compatibility review<\/td>\n<\/tr>\n<tr>\n<td>Pole is available; socket is missing<\/td>\n<td>Pole model and revision, original ground-interface reference, supplier-approved socket combination<\/td>\n<td>Hold until the replacement socket is confirmed<\/td>\n<\/tr>\n<tr>\n<td>Socket remains; pole is missing<\/td>\n<td>Socket model, original airer reference, maker&#8217;s replacement-pole list<\/td>\n<td>Do not infer the replacement pole from socket opening alone<\/td>\n<\/tr>\n<tr>\n<td>Cap is missing<\/td>\n<td>Socket identity and maker&#8217;s cap-matching method<\/td>\n<td>Order only the cap listed for that socket family<\/td>\n<\/tr>\n<tr>\n<td>Insert is missing<\/td>\n<td>Both mating component identities and insert part reference<\/td>\n<td>Hold; no generic insert substitution<\/td>\n<\/tr>\n<tr>\n<td>Original model is unknown<\/td>\n<td>Photographs and maker support route, if available<\/td>\n<td>Identify as unresolved, not universal-fit<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>This table is for assortment and support routing. It does not define an installation method or engineering acceptance test. It helps teams decide what information is missing before making a promise. If a replacement SKU covers more than one named combination, maintain the exact approved pairings in the record rather than collapsing them into a sentence such as \u201cfits all common poles.\u201d<\/p>\n<p>A private-label importer should be especially careful when multiple sourced parts are packaged together. The bag, carton, instruction sheet, and web listing should identify the same set. If a socket and insert are sourced separately, the BOM should show their relationship and change-control owner. An unrecorded substitution can create uncertainty about fit even where the individual pieces appear unchanged.<\/p>\n<p>If the supplier proposes a new insert, an adapter, or a replacement socket not listed in the original maker&#8217;s documentation, treat it as a new proposed combination. Ask the responsible supplier to issue compatibility information and define what it has assessed. Do not advertise a new adapter as approved merely because a sample can be assembled by hand.<\/p>\n<h2>Match the Closure Cap to the Actual Socket<\/h2>\n<p>A closure cap is a separate replacement item with its own interface. Some product families use colors or other identifiers to distinguish cap variants, but the K1442 research pack confirms that this mapping is brand-specific. The cap color is not a universal standard. A buyer should identify the socket maker and model, then use that maker&#8217;s current identification information.<\/p>\n<p>The cap should be represented in the product record as a model-matched component. Record whether it is included in the ground socket listing, sold separately, or bundled into a replacement kit. If the cap can be purchased independently, describe the exact socket family it fits. Avoid vague product copy that implies any cap with a similar appearance or nominal opening is suitable.<\/p>\n<p>At the sample-review stage, compare the supplied cap with the socket identified in the same kit. Record any markings, color, or model reference as observed, but use maker documentation as the compatibility basis. If the packaging lacks a model identifier, ask the supplier whether that omission is acceptable for distribution and what catalog reference should be used. A buyer should not create a cross-brand color chart from one supplier&#8217;s catalog.<\/p>\n<p>The cap review is also a good time to distinguish cosmetic appearance from documented fit. A cap can look as though it covers an opening, yet its retention detail or dimensions may differ. The article does not prescribe a universal pull, sealing, weather, or contamination test. If a buyer needs evidence for any of those claims, the responsible supplier should define the method, specimen, acceptance limits, and applicable model.<\/p>\n<p>For replacement services, a simple &quot;send a photo&quot; procedure can reduce errors, but it should not invite a customer to dismantle an installed component or perform unsafe measurements. Ask only for information the customer can provide safely, such as a model label or already available photos. Route uncertain cases to the original manufacturer or a qualified service provider. The distributor&#8217;s responsibility is to describe its evidence boundary honestly.<\/p>\n<figure class=\"wp-block-image size-large koitor-blog-image\"><img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-socket-opening-review.webp\" alt=\"Close-up of the generic rotary dryer pole insert and socket opening for compatibility review\" style=\"width:100%;max-width:960px;height:auto;display:block;margin:0 auto;\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-socket-opening-review-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-socket-opening-review-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-socket-opening-review-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-socket-opening-review-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-socket-opening-review-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1442-dryer-pole-socket-opening-review.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><\/figure>\n<h2>Keep Replacement Fit Separate From Ground Installation<\/h2>\n<p>A pole\/socket fit and an installation in soil or another host structure are different matters. A compatible product combination does not establish how deep a component should be installed, what soil conditions are suitable, how it should be anchored, or what weather and loading conditions are acceptable. Those questions depend on the named product, its instructions, the site, and the responsible installation party.<\/p>\n<p>The buyer should not infer anchorage capacity from a photograph, a steel material description, a screw-in appearance, or the fact that a pole enters the receiver. Do not add a recommended embedment depth, wind limit, operating load, soil type, or safety statement unless a responsible source specifies it for the exact product and conditions. This guide does not provide such numbers.<\/p>\n<p>When an importer sells the whole dryer system, it should review the product maker&#8217;s instructions and any applicable assessment independently. When it sells a spare socket only, it should define the replacement scope and direct the user to the appropriate product-specific guidance. When it private-labels a kit, it should have the supplier define which party owns compatibility, installation instructions, and performance claims. The distributor may coordinate the process without acting as the technical authority.<\/p>\n<p>An evidence note can map each claim to its source:<\/p>\n<ul>\n<li>Product identity: manufacturer catalog, support document, or model label.<\/li>\n<li>Compatibility: current maker-issued list for exact model references.<\/li>\n<li>Material: product specification for the quoted SKU.<\/li>\n<li>Installation: official instructions for the named product and intended host.<\/li>\n<li>Performance: test or engineering documentation that states the sample and conditions.<\/li>\n<li>Package contents: controlled BOM, label, or supplier confirmation.<\/li>\n<li>Replacement cross-reference: a maker or authorized service listing.<\/li>\n<\/ul>\n<p>If the source does not cover the claim, leave the claim out or request clarification. An online marketplace listing may help identify a replacement search phrase, but it is not automatically the maker&#8217;s engineering statement. A customer forum post can signal a question; it does not prove universal compatibility or safe installation. The research pack accordingly treats community discussion and search results as discovery evidence, not as technical proof.<\/p>\n<h2>Approve the Replacement Kit and its Change Controls<\/h2>\n<p>A buyer should review the complete replacement kit, not merely a hero photograph. Compare the actual sample and packing list with the maker&#8217;s compatibility statement. Include any pole sleeve, insert, cap, fasteners, instructions, and packaging item that the supplier says is part of the order. Mark all exclusions. If only one component is sold, state clearly what is not included.<\/p>\n<p>A controlled spare-part SKU should capture:<\/p>\n<ul>\n<li>Internal SKU and buyer-facing name.<\/li>\n<li>Supplier, model, and document revision.<\/li>\n<li>Named dryer\/pole\/socket combinations supported by current evidence.<\/li>\n<li>Insert and cap identities, including whether each is included.<\/li>\n<li>Parts and quantities per retail or service unit.<\/li>\n<li>Installation and compatibility document references.<\/li>\n<li>Known model exclusions.<\/li>\n<li>Material\/finish claims copied only from the exact product&#8217;s documentation.<\/li>\n<li>Customer-support escalation path for unknown models.<\/li>\n<li>Review date and next trigger for revalidation.<\/li>\n<\/ul>\n<p>Changes that should trigger a compatibility review can include a different pole model, a revised socket, a substitute insert, a changed cap, altered packaging contents, or updated instructions. A supplier&#8217;s product-family label alone is not enough to establish that a change is harmless. Ask what changed, which old pairings remain approved, and whether the buyer-facing cross-reference requires updating.<\/p>\n<p>For a range with several pole sizes or socket types, create a matrix where each row is a named combination, not a broad category. A matrix can include the original dryer model, pole identity, socket identity, insert reference, closure-cap reference, document source, and status. The status could be confirmed, excluded, or unresolved. This makes it harder for a sales team to transform an unverified edge case into an unconditional claim.<\/p>\n<p>A sample approved for one combination should not automatically approve another. Store the sample and documents together under their model and revision. If the replacement is sold through multiple channels, ensure the product page, service sheet, package, and warehouse part number resolve to the same kit. That consistency is especially valuable when an assortment contains low-cost pieces that customers often reorder without retaining the original product documentation.<\/p>\n<h3>Buyer Questions to Resolve Before Ordering<\/h3>\n<p><strong>Is the nominal pole diameter sufficient to select a ground socket?<\/strong> Not by itself. Use the original model and maker&#8217;s current compatibility information. A nominal size may not describe every interface detail or model exclusion.<\/p>\n<p><strong>Are a metal spike and a screw-in socket the same product type?<\/strong> No. They are different mounting architectures. The supplier&#8217;s model identity and instructions determine what is being quoted; buyers should not transfer installation or performance assumptions between them.<\/p>\n<p><strong>Is a cap color universal?<\/strong> No. In the documented example, cap identification belongs to a specific maker&#8217;s product family. Apply it only to that maker&#8217;s current instructions and socket models.<\/p>\n<p><strong>Does the pole fitting into a socket prove anchorage suitability?<\/strong> No. Interface fit and ground installation are separate questions. The fit does not establish soil suitability, installation depth, wind behavior, or system performance.<\/p>\n<p><strong>Can a generic insert be used when the original is missing?<\/strong> Do not assume so. Identify both mating components and request the correct insert reference from the responsible supplier.<\/p>\n<p><strong>Can product information from a similar model be reused?<\/strong> Only if the maker confirms that the information applies to the exact quoted combination. Preserve exclusions and revision details.<\/p>\n<h3>A Replacement RFQ Buyers Can Reconcile<\/h3>\n<p>Before ordering, provide the original dryer or pole model where known, identify the component that needs replacement, and request the exact socket, insert, and cap references that belong together. Ask the supplier to state supported combinations and exclusions, share a current compatibility source, and list the contents of the proposed kit. Review a representative set against the documents. Keep installation and anchorage questions with the responsible maker or qualified party.<\/p>\n<p>A clear <strong>rotary dryer ground socket pole compatibility<\/strong> record helps importers compare spare parts and reduce avoidable assortment ambiguity. It does not make a socket universal, certify the installation, or establish that Koitor currently manufactures this adjacent product. Koitor&#8217;s documented focus is bathroom and home-storage metal hardware. If your broader range includes metal hardware that may fit that scope, review the <a href=\"https:\/\/koitorhardware.com\/fr\/oem-home-storage-hardware-manufacturer\/\">OEM home-storage hardware information<\/a> and send drawings or an identified reference sample through <a href=\"https:\/\/koitorhardware.com\/fr\/contact\/\">Page de contact de Koitor<\/a> for a scope discussion.<\/p>\n<h2>Collaborez avec Koitor Hardware<\/h2>\n<section class=\"koitor-blog-cta\" style=\"margin-top:36px;padding:28px;border:1px solid #D0D5DD;border-radius:16px;background:#F8FAFC;\">\n<h3 style=\"margin-top:0;margin-bottom:12px;font-size:28px;line-height:1.25;color:#101828;\">Discuss an Adjacent Metal Hardware Scope<\/h3>\n<p style=\"font-size:16px;line-height:1.7;margin-bottom:20px;color:#344054;\">Koitor&#8217;s confirmed focus is bathroom and home-storage metal hardware. For an adjacent product, share a controlled drawing, representative sample and any bought-in component scope so the team can assess whether the request fits its confirmed capabilities. This review does not imply that the complete product is currently manufactured.<\/p>\n<div style=\"display:flex;gap:12px;flex-wrap:wrap;align-items:center;margin-bottom:24px;\">\n    <a href=\"https:\/\/koitorhardware.com\/fr\/contact\/\" style=\"display:inline-flex;align-items:center;justify-content:center;min-height:48px;padding:0 22px;border-radius:8px;background:#FF5A1F;color:#ffffff;font-weight:700;text-decoration:none;line-height:1;\">Discutez de votre projet<\/a><br \/>\n    <a href=\"https:\/\/koitorhardware.com\/fr\/oem-home-storage-hardware-manufacturer\/\" style=\"display:inline-flex;align-items:center;justify-content:center;min-height:48px;padding:0 22px;border-radius:8px;border:1px solid #FF5A1F;color:#FF5A1F;background:#ffffff;font-weight:700;text-decoration:none;line-height:1;\">Review OEM Manufacturing<\/a>\n  <\/div>\n<div class=\"koitor-article-tags\" style=\"margin-top:24px;padding-top:18px;border-top:1px solid #E5E7EB;display:flex;align-items:center;gap:8px;flex-wrap:wrap;\">\n    <span style=\"font-size:14px;font-weight:700;color:#344054;margin-right:4px;\">Mots-cl\u00e9s :<\/span><br \/>\n    <span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Replacement Parts<\/span><span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Component Sourcing<\/span><span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">SKU Management<\/span><span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Validation d'\u00e9chantillon<\/span>\n  <\/div>\n<\/section>","protected":false},"excerpt":{"rendered":"<p>Replacement buyers should identify the original pole and model, distinguish the socket&#8217;s mounting architecture, confirm any insert, and match the correct cap.<\/p>","protected":false},"author":1,"featured_media":7271,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[145],"tags":[368,359,76,372],"class_list":["post-7300","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-hardware-sourcing-knowledge","tag-component-sourcing","tag-replacement-parts","tag-sample-approval","tag-sku-management"],"_links":{"self":[{"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/posts\/7300","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/comments?post=7300"}],"version-history":[{"count":1,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/posts\/7300\/revisions"}],"predecessor-version":[{"id":7301,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/posts\/7300\/revisions\/7301"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/media\/7271"}],"wp:attachment":[{"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/media?parent=7300"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/categories?post=7300"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/tags?post=7300"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}