{"id":8720,"date":"2026-11-17T07:11:38","date_gmt":"2026-11-17T07:11:38","guid":{"rendered":"https:\/\/koitorhardware.com\/?p=8720"},"modified":"2026-11-17T07:11:41","modified_gmt":"2026-11-17T07:11:41","slug":"steel-vs-iron","status":"publish","type":"post","link":"https:\/\/koitorhardware.com\/fr\/steel-vs-iron\/","title":{"rendered":"Steel vs Iron: Identify the Material Behind the Hardware Label"},"content":{"rendered":"<p><strong>Steel vs iron<\/strong> is a comparison of related material terms, not a simple contest between two interchangeable metals. Steel is an iron-based alloy whose composition and properties vary by grade and product form; the word \u201ciron\u201d can refer to the element, cast iron, wrought iron, or a historical or decorative description. For a bathroom or home-storage hardware purchase, ask the supplier to identify the actual material and manufacturing route for the part rather than approving it from a short catalogue label. Neither name alone proves strength, corrosion resistance, finish quality, or suitability for a particular use.<\/p>\n<h2>What problem does the steel vs iron comparison help buyers solve?<\/h2>\n<p>Importers often encounter broad labels in product descriptions, quotations, drawings, and sample discussions. One seller may say \u201ciron bracket,\u201d another \u201csteel bracket,\u201d while a third uses \u201cmetal construction.\u201d Those words do not necessarily describe equivalent components. The part could be a formed steel bracket, a cast iron item, a steel component with a decorative coating, or an assembly containing more than one material. A buyer who compares only the material word may approve different constructions without noticing.<\/p>\n<p>The comparison is especially useful when a product is being substituted, developed under a private label, or sourced from more than one supplier. A shared outline does not establish a shared material. A sample that looks similar may use a different substrate, wall section, joining method, or finish. The material declaration should therefore connect to a specific drawing revision, item number, and finished product configuration.<\/p>\n<p>There is also a terminology problem. In ordinary conversation, \u201ciron\u201d is sometimes used loosely for any dark or heavy-looking metal object. In technical and historical contexts it can identify specific material families or forms. \u201cSteel\u201d is more specific than \u201cmetal,\u201d but it still does not name a grade or tell the buyer whether the part is sheet, tube, wire, casting, or another form. Accurate sourcing starts by clarifying what the supplier means in that particular offer.<\/p>\n<p>This guide does not rank all steel above all iron or claim one family is always stronger, lighter, cheaper, or more rust resistant. Those properties depend on exact composition, processing, geometry, surface condition, finish, joining, and service environment. The practical outcome is a better RFQ and a more auditable approval record, not a universal material winner.<\/p>\n<h2>What do the words iron and steel actually identify?<\/h2>\n<p>Iron is a chemical element and also part of the name of several engineering materials. Cast iron is a family of iron-carbon alloys made for particular casting behavior and uses. Wrought iron is a historical material with a distinct production history, and in decorative product language the term may also be used imprecisely. Steel is an iron-based alloy containing carbon and potentially other alloying elements. <a href=\"https:\/\/worldsteel.org\/about-steel\/what-is-steel\/\" rel=\"nofollow noopener\" target=\"_blank\">Worldsteel\u2019s overview of what steel is<\/a> explains that grades vary in composition and properties; a generic label cannot stand in for the grade-specific information relevant to a purchase.<\/p>\n<p>For buyers, the important distinction is between the broad family name and the actual material in the part. A declaration of \u201csteel\u201d may still leave unanswered whether the item uses a particular stainless or carbon-steel grade, whether the part is made from sheet, tube, wire, or bar, and whether a coating covers the substrate. An \u201ciron\u201d label might identify cast iron in one context, but it may also be a marketing description that needs clarification. Ask for the supplier\u2019s defined material name and applicable grade, not an interpretation based on appearance.<\/p>\n<p><a href=\"https:\/\/www.engineshed.scot\/building-advice\/building-materials\/iron\/\" rel=\"nofollow noopener\" target=\"_blank\">Historic Environment Scotland\u2019s building-material guidance<\/a> describes iron categories in the context of traditional and historic buildings. That distinction is useful for understanding why \u201ccast iron\u201d and \u201cwrought iron\u201d are not synonyms. It does not establish that a modern bathroom accessory is made from either material. Heritage terminology should not be transferred to a current catalogue without supplier confirmation.<\/p>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Label on a quote<\/th>\n<th>What it may identify<\/th>\n<th>What it does not establish<\/th>\n<th>Buyer follow-up<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Steel<\/td>\n<td>An iron-based alloy<\/td>\n<td>Exact grade, form, finish, or performance<\/td>\n<td>Request grade and part-specific declaration<\/td>\n<\/tr>\n<tr>\n<td>Cast iron<\/td>\n<td>A cast iron material family<\/td>\n<td>Suitability for the proposed hardware or environment<\/td>\n<td>Confirm material, design, finish, and intended use<\/td>\n<\/tr>\n<tr>\n<td>Wrought iron<\/td>\n<td>Historical material or possibly loose decorative wording<\/td>\n<td>That the product uses traditional wrought iron<\/td>\n<td>Ask the supplier to define the term in writing<\/td>\n<\/tr>\n<tr>\n<td>Iron or metal<\/td>\n<td>A broad or informal description<\/td>\n<td>Composition, process, or interchangeability<\/td>\n<td>Require a precise material specification<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>The distinction between \u201cmetal\u201d and \u201ciron\u201d also matters. Steel is a metal material, but not every metal is iron or steel. A product can combine steel with zinc alloy, aluminum, brass, polymer pads, or purchased fasteners. If the item is an assembly, the buyer should request a component-level material breakdown for critical parts rather than a single label for the whole product.<\/p>\n<h2>How should buyers verify the material on a hardware quotation?<\/h2>\n<p>Start with the item and document identity. Put the product code, drawing number, revision, component name, and quantity beside the material question. A supplier\u2019s response about a similar part or an earlier sample should not silently become the answer for a changed design. If a quotation covers several components, list which material applies to each one.<\/p>\n<p>For buyers searching steel vs iron because a supplier has offered a substitution, request a side-by-side statement of the original and proposed material, the process route, and any drawing or finish revisions. This makes the comparison specific to the item being purchased.<\/p>\n<p>Ask for the exact grade or the most specific commercial material designation the supplier can support. If a specification uses a recognized grade system, state that system and avoid mixing names from different standards without a documented equivalence. A supplier declaration, mill document, purchase specification, or other available record may provide evidence, but the suitable record depends on the product and contract. Do not assume every decorative component has a mill certificate, and do not claim a document proves more than it actually covers.<\/p>\n<figure class=\"wp-block-image size-large koitor-blog-image\"><img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-process-material-identification.webp\" alt=\"A buyer compares an unmarked steel strip and cast iron coupon beside a material declaration\" style=\"width:100%;max-width:960px;height:auto;display:block;margin:0 auto;\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-process-material-identification-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-process-material-identification-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-process-material-identification-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-process-material-identification-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-process-material-identification-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-process-material-identification.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><\/figure>\n<p>Clarify product form and process separately from material. A steel strip formed into a bracket is not the same manufacturing route as a cast part, even if the outlines appear comparable. A steel tube may be cut, bent, welded, ground, and finished; a cast component follows a different sequence. Process affects geometry, joints, inspection access, and the way a supplier controls the finished feature. It does not automatically prove a quality ranking.<\/p>\n<p>Keep substrate and surface finish distinct. A chrome-colored or black finish does not identify the underlying body material. If corrosion or cleaning conditions matter, specify the exposure and maintenance context, then ask what finish system and substrate the supplier proposes. A visual sample can confirm appearance under agreed viewing conditions, but it cannot identify hidden composition or prove long-term performance by itself.<\/p>\n<p>For a substitution, make the approval boundary explicit. Record the original material, proposed replacement, affected parts, drawing changes, finish implications, and required evidence. Ask the supplier to identify which dimensions, joins, or interfaces might change. Do not treat a new label as equivalent merely because both materials contain iron or the replacement looks similar.<\/p>\n<h2>What can a magnet, appearance, or weight tell you?<\/h2>\n<p>A magnet can provide a limited observation about a sample, but it is not a reliable grade-identification method. Magnetic response varies with material family, processing, and component construction. A magnet attracting one area may indicate a ferromagnetic part or a hidden steel component; it does not by itself reveal exact chemistry, grade, heat treatment, coating, or product suitability. Conversely, a weak or absent attraction does not certify a particular stainless grade.<\/p>\n<p>Appearance has similar limits. Color, texture, and visible casting or forming features can help a buyer compare samples and identify questions for the supplier. They do not establish composition. A dark object might be coated steel, cast iron, or another substrate. A polished face does not reveal what lies beneath it. A decorative \u201ciron\u201d look is a style description unless the supplier ties it to a verified material declaration.<\/p>\n<p>Weight alone is not a material test. It depends on dimensions, wall thickness, cavities, reinforcements, attached hardware, and the density of the actual material. A heavier sample can have more material without meeting the buyer\u2019s functional need; a lighter one may use a different geometry or construction. Compare equivalent drawings, measure critical dimensions, and ask for an explanation of any mass change rather than using weight as a stand-in for strength.<\/p>\n<p>When the contract requires identity verification, choose an appropriate inspection or testing method with a qualified provider. The method should answer the defined question and match the sample, lot, and acceptance criteria. Do not infer that an ordinary visual check, handheld magnet, or supplier statement is equivalent to laboratory analysis. Also avoid asking for unnecessary testing where the decision can be supported by clear specifications and traceable procurement records.<\/p>\n<h2>How can material choice affect fabrication and finishing?<\/h2>\n<p>The same design intent may be produced through different material forms, but the change can affect more than the raw stock. Sheet, tube, wire, casting, and machined forms have distinct manufacturing considerations. Bends, holes, threads, welds, edges, and cosmetic faces need to be evaluated against the selected material and process. When the material changes, the supplier should review whether the current drawing remains manufacturable and whether tolerances and inspection points still make sense.<\/p>\n<p>Joining methods and finishing sequence also matter. If a steel assembly uses welds, the drawing should identify critical joint positions and any cosmetic faces. A cast iron route may present different geometry and finishing considerations from a formed steel assembly. No general statement that one route is \u201cstronger\u201d or \u201cbetter\u201d can replace a review of the actual joint and loads. If the part is safety-related or has a defined load requirement, the buyer should supply the applicable requirement and agree on evidence and acceptance criteria before production.<\/p>\n<p>Finishing should be defined as a system rather than a color name. Identify the intended appearance, exposed environment, cleaning conditions, visible surfaces, and any relevant substrate preparation or coating requirements. Different materials may need different preparation or coating routes. The buyer should obtain a representative finished sample and specify the approved reference, viewing conditions, and change-control process.<\/p>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Product feature<\/th>\n<th>Material question<\/th>\n<th>Supplier evidence or review<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Formed bracket<\/td>\n<td>What exact steel grade and sheet form are proposed?<\/td>\n<td>Material declaration tied to drawing and revision<\/td>\n<\/tr>\n<tr>\n<td>Decorative fitting<\/td>\n<td>Does \u201ciron\u201d mean cast material, a style, or a coating appearance?<\/td>\n<td>Written definition and component-level material list<\/td>\n<\/tr>\n<tr>\n<td>Welded assembly<\/td>\n<td>Does the material change affect the specified joint or finish sequence?<\/td>\n<td>Drawing review and agreed sample inspection<\/td>\n<\/tr>\n<tr>\n<td>Mixed-material product<\/td>\n<td>Which material applies to each component and fastener?<\/td>\n<td>Bill of materials or component breakdown<\/td>\n<\/tr>\n<tr>\n<td>Surface-finished part<\/td>\n<td>What is the substrate beneath the approved appearance?<\/td>\n<td>Finish specification and representative sample<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Packaging and transportation can obscure or damage the finish even when the base material is correct. Define protective separation, moisture protection where relevant, carton arrangement, and identification of revisions. If the sample and production item differ in material or finish, a package label alone is not a sufficient control; the bill of materials and approval records should connect the item to the intended specification.<\/p>\n<h2>What sourcing mistakes create avoidable material risk?<\/h2>\n<p><strong>Treating \u201ciron\u201d and \u201csteel\u201d as exact grade names.<\/strong> They are broad terms. The buyer should request a specific designation and its relationship to the item, not infer the material from a catalogue headline.<\/p>\n<p><strong>Assuming a material name predicts performance.<\/strong> Corrosion behavior, strength, stiffness, and durability depend on grade, form, processing, geometry, finish, and conditions. Use a product-specific requirement and evidence rather than a family-level slogan.<\/p>\n<p><strong>Approving by appearance alone.<\/strong> Similar colors or shapes can hide different substrates. Record material and finish separately and tie both to the sample and revision being approved.<\/p>\n<p><strong>Using a magnet as certification.<\/strong> A magnet is a limited screening observation. It cannot authenticate an exact grade or prove a component\u2019s performance. If identity matters contractually, define the appropriate documentation or test.<\/p>\n<p><strong>Changing material without reviewing the drawing.<\/strong> A substitution can affect forming, joining, fit, finish, and inspection. Require the supplier to identify consequences and receive written approval before the change is applied to production.<\/p>\n<p><strong>Comparing supplier quotations with different scopes.<\/strong> One quote may cover a complete assembly while another prices only a body component or assumes different purchased fasteners. Normalize the bill of materials, finish, packaging, and evidence requirements before comparing cost.<\/p>\n<p><strong>Overstating a test or document.<\/strong> A certificate may cover a batch or raw material but not every finished product attribute. Match the evidence to the claim: identity, dimensions, finish, or functional requirement. Keep the record linked to the appropriate lot or item where possible.<\/p>\n<h2>How can a buyer document a material decision before ordering?<\/h2>\n<p>Create a short specification record with separate fields for product identity, base material, grade or designation, product form, process route, finish, critical dimensions, and evidence. If a feature is not yet known, write \u201csupplier to propose\u201d and make approval a checkpoint. A blank field hidden inside a general product description is likely to produce inconsistent offers.<\/p>\n<p>For a multi-SKU program, make the record usable across repeat orders. Keep one line per product code and identify shared components only when the drawing and bill of materials confirm that they are identical. If two towel bars use the same end cap but different bodies, the body material note should not be copied to the end cap by assumption. Add a revision date, approver, and the source document for every declared material. When a supplier changes a purchased screw or insert, require the change to be visible in the component record if that item affects fit, appearance, corrosion exposure, or assembly. This prevents an old approval from silently being reused for a materially different construction.<\/p>\n<p>The sourcing team can also separate mandatory requirements from preferences. A regulatory, contractual, or engineering requirement should be identified as such and supported by the appropriate specification. A preferred material may be open to alternatives if the supplier explains the trade-off and the buyer approves it. This distinction can preserve flexibility without weakening a requirement: the supplier can propose a substitute, but cannot silently apply one. For every approved alternative, document the evidence accepted, any revised sample, and any changed inspection point. These small records are useful when production transfers between factories or when a buyer compares a reorder against the first approved lot.<\/p>\n<figure class=\"wp-block-image size-large koitor-blog-image\"><img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-checklist-material-documentation.webp\" alt=\"A buyer checklist with unmarked steel and iron samples, drawing, caliper, and blank material record\" style=\"width:100%;max-width:960px;height:auto;display:block;margin:0 auto;\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-checklist-material-documentation-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-checklist-material-documentation-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-checklist-material-documentation-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-checklist-material-documentation-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-checklist-material-documentation-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/K1695-checklist-material-documentation.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><\/figure>\n<p>Use the drawing to show where each material applies. For a multi-part assembly, a numbered bill of materials is clearer than a single note such as \u201csteel construction.\u201d Call out any bought-in screw, anchor, pad, insert, or decorative cover when its material affects appearance or use. If a supplier sources a component from another provider, ask who is responsible for declaring it and controlling changes.<\/p>\n<p>Request a sample that represents the proposed material and finish route. State which features are being reviewed: fit, appearance, assembly, or a defined functional check. Mark the approved sample and link it to the drawing revision and quotation. If the sample is a prototype with a different process or material, label it as such so it is not mistaken for a production-equivalent approval.<\/p>\n<p>The record should state what happens if a supplier cannot provide the requested evidence. The options may include a substitute document, a mutually agreed test, a revised specification, or a hold pending clarification. Avoid silently downgrading a requirement. When a material designation is not legally or technically mandatory, the decision may be commercial, but it should still be transparent and repeatable across reorders.<\/p>\n<p>When a material question is part of a custom product project, send the drawing and proposed bill of materials through the <a href=\"https:\/\/koitorhardware.com\/fr\/fabricant-de-quincaillerie-de-salle-de-bains-sur-mesure\/\">custom bathroom hardware manufacturing review<\/a> or the <a href=\"https:\/\/koitorhardware.com\/fr\/oem-home-storage-hardware-manufacturer\/\">home-storage OEM information page<\/a> as applicable. These pages describe the relevant manufacturing scope; they do not certify a material grade or replace the supplier\u2019s item-specific declaration. For steel vs iron questions, attach the exact quote line and sample identity so that the response addresses the correct component.<\/p>\n<ul>\n<li>Identify the exact product, component, drawing number, and revision.<\/li>\n<li>Replace broad terms such as \u201cmetal\u201d or \u201ciron\u201d with a specific material question.<\/li>\n<li>Ask for the grade or commercial designation and the standard system used, if applicable.<\/li>\n<li>Specify whether the part is sheet, tube, wire, casting, machining stock, or another form.<\/li>\n<li>Separate substrate from finish, plating, coating, and decorative appearance.<\/li>\n<li>List mixed-material components, purchased fasteners, pads, and inserts separately.<\/li>\n<li>State the application environment, cleaning conditions, and visible faces.<\/li>\n<li>Define critical dimensions, interfaces, and any functional acceptance criteria.<\/li>\n<li>Request the available evidence and clarify what each record covers.<\/li>\n<li>Require written review and approval before material or process substitutions.<\/li>\n<li>Identify whether the requested sample represents prototype or production route.<\/li>\n<li>Tie the approved sample, drawing, bill of materials, and quote to one revision.<\/li>\n<li>Confirm packaging protection and product identification for the approved version.<\/li>\n<li>Keep the decision record with the purchase order and reorder documentation.<\/li>\n<\/ul>\n<p><strong>Foire aux questions<\/strong><\/p>\n<h3>Is steel a type of iron?<\/h3>\n<p>Steel is an iron-based alloy, generally containing carbon and potentially other alloying elements. The exact composition and properties depend on the grade. That does not make the everyday label \u201ciron\u201d specific enough for a purchase specification.<\/p>\n<h3>Is cast iron the same as steel?<\/h3>\n<p>No. Cast iron and steel are different material families with different compositions and manufacturing considerations. A buyer should identify the actual material, form, and intended application rather than treating the names as interchangeable.<\/p>\n<h3>Does a magnet prove that hardware is steel?<\/h3>\n<p>No. Magnetic response is only a limited observation and does not identify an exact grade, composition, or performance. Use supplier documentation or an appropriate defined verification method when material identity is a requirement.<\/p>\n<h3>Is steel always stronger than iron?<\/h3>\n<p>There is no reliable universal answer from those broad names alone. Strength depends on the specific material, processing, geometry, and the property being considered. Compare the specified product and its evidence against the actual requirement.<\/p>\n<h3>What should an importer ask when a supplier writes \u201ciron\u201d?<\/h3>\n<p>Ask the supplier to define the term for the quoted component, identify the material and grade where applicable, state the product form and process, and provide the evidence available for that item. Clarify the substrate separately from any finish or decorative description.<\/p>\n<section class=\"koitor-blog-cta\" style=\"margin-top:42px;padding:28px;border:1px solid #D0D5DD;border-radius:16px;background:#F8FAFC;\">\n<h2 style=\"margin-top:0;margin-bottom:12px;font-size:28px;line-height:1.25;\">Clarify a Material Specification Before Your Next Hardware RFQ<\/h2>\n<p style=\"font-size:16px;line-height:1.7;margin-bottom:20px;\">Koitor Hardware is a family-owned custom metal hardware factory. Share a drawing or sample and the supplier\u2019s material description to discuss the information needed for a clear OEM quotation.<\/p>\n<div style=\"display:flex;gap:12px;flex-wrap:wrap;\"><a href=\"https:\/\/koitorhardware.com\/fr\/contact\/\" style=\"display:inline-block;padding:12px 20px;border-radius:8px;background:#FF5A1F;color:#ffffff;font-weight:700;text-decoration:none;\">Discutez de votre projet<\/a><br \/>\n<a href=\"https:\/\/koitorhardware.com\/fr\/oem-home-storage-hardware-manufacturer\/\" style=\"display:inline-block;padding:12px 20px;border-radius:8px;border:1px solid #FF5A1F;color:#FF5A1F;background:#ffffff;font-weight:700;text-decoration:none;\">Explore OEM Manufacturing<\/a><\/div>\n<div class=\"koitor-article-tags\" style=\"margin-top:24px;padding-top:18px;border-top:1px solid #E5E7EB;display:flex;align-items:center;gap:8px;flex-wrap:wrap;\"><span style=\"font-size:14px;font-weight:700;color:#344054;margin-right:4px;\">Mots-cl\u00e9s :<\/span><br \/>\n<span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Guide d'achat pour les importateurs<\/span><br \/>\n<span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Quincaillerie de salle de bains sur mesure<\/span><br \/>\n<span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Fabrication OEM en petites s\u00e9ries<\/span><\/div>\n<\/section>","protected":false},"excerpt":{"rendered":"<p>Steel vs iron is a comparison of related material terms, not a simple contest between two interchangeable metals. Steel is an iron-based alloy whose composition and properties vary by grade and product form; the word \u201ciron\u201d can refer to the element, cast iron, wrought iron, or a historical or decorative description. For a bathroom or [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":8717,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[145],"tags":[38,40,39],"class_list":["post-8720","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-hardware-sourcing-knowledge","tag-custom-bathroom-hardware","tag-importer-buying-guide","tag-small-batch-oem"],"_links":{"self":[{"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/posts\/8720","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/comments?post=8720"}],"version-history":[{"count":1,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/posts\/8720\/revisions"}],"predecessor-version":[{"id":8722,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/posts\/8720\/revisions\/8722"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/media\/8717"}],"wp:attachment":[{"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/media?parent=8720"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/categories?post=8720"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/koitorhardware.com\/fr\/wp-json\/wp\/v2\/tags?post=8720"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}