{"id":8882,"date":"2026-11-18T06:23:27","date_gmt":"2026-11-18T06:23:27","guid":{"rendered":"https:\/\/koitorhardware.com\/?p=8882"},"modified":"2026-11-18T06:23:27","modified_gmt":"2026-11-18T06:23:27","slug":"tig-vs-mig-welding","status":"publish","type":"post","link":"https:\/\/koitorhardware.com\/pt\/tig-vs-mig-welding\/","title":{"rendered":"TIG vs MIG Welding: Process Differences and Hardware Sourcing Trade-offs"},"content":{"rendered":"<p>TIG vs MIG welding compares two arc-welding processes with different electrode and filler arrangements. TIG (GTAW) uses a non-consumable tungsten electrode and may use separate filler metal; MIG (GMAW) feeds a consumable wire that becomes filler. Neither process is automatically stronger, cheaper or better for every metal hardware part. Buyers should evaluate the joint geometry, material, access, production repetition, cosmetic face, finishing plan and evidence from a representative sample before accepting a route.<\/p>\n<h2>What buyer decision does a TIG vs MIG welding comparison support?<\/h2>\n<p>The comparison helps a product developer or importer understand a supplier\u2019s proposed joining route and ask what the finished part must prove. It does not select a process from a headline preference. For a rack, bracket, basket, frame or accessory, the important question is whether the selected process and controlled production method create a joint that fits the drawing, performs its intended function and meets agreed visual requirements.<\/p>\n<p>TIG and MIG are commonly used names; technical references may use GTAW for gas tungsten arc welding and GMAW for gas metal arc welding. MIG is often used conversationally for GMAW, though shielding gas can include mixtures that are not strictly inert. Buyers can use the familiar labels while asking the manufacturer to identify the actual process and consumables planned for the product.<\/p>\n<p>The process matters, but so do the joint design, base material, fit-up, fixture, operator or automation, settings, sequence, inspection and post-weld finishing. A buyer searching tig vs mig welding may be comparing general process education, but a sourcing decision needs to connect the comparison to a specific part and production route. A process name alone does not reveal whether a hidden joint is fused appropriately, whether distortion is controlled, or whether a visible surface will meet the buyer\u2019s appearance criteria. A machine demonstration or attractive weld bead is not a finished-part qualification.<\/p>\n<p>This article supports sourcing decisions for fabricated metal hardware. It is not a welding procedure, operator training guide, safety instruction, approved WPS\/PQR, strength calculation or certification. Technical requirements for pressure equipment, structural applications or regulated products need the appropriate engineering and code review. Do not transfer those approvals from a general comparison article.<\/p>\n<h2>How do TIG and MIG differ in the way they form a weld?<\/h2>\n<p>Both processes create an electric arc that melts material at a joint while shielding protects the weld area. In TIG\/GTAW, a non-consumable tungsten electrode carries the arc. Filler metal, when needed, is supplied separately. In MIG\/GMAW, a continuously fed wire electrode serves as the consumable electrode and filler. The mechanisms influence control, filler delivery, setup and production considerations; they do not determine the final joint quality by themselves.<\/p>\n<p>The <a href=\"https:\/\/www.twi-global.com\/technical-knowledge\/faqs\/mig-vs-tig-welding\" style=\"color:#0B5CAD;font-weight:600;text-decoration:underline;text-underline-offset:3px;\" rel=\"nofollow noopener\" target=\"_blank\">TWI process comparison<\/a> describes these core distinctions. Its broad comparisons should be read as context, not a universal prediction for a particular bathroom rack, basket or bracket. A source may compare typical processes under selected conditions; the buyer still needs a relevant drawing, part material, joint and acceptance plan.<\/p>\n<p>The terms MIG and MAG are sometimes separated according to the shielding gas and industry convention. In practical purchasing discussions, clarify whether the supplier means GMAW and ask what process, wire, shielding arrangement and controlled procedure will be used. Do not assume that a colloquial \u201cMIG\u201d label reveals the gas or exact consumables. The supplier can explain the production route for the particular material and part.<\/p>\n<p>TIG may use a separate filler rod or may be applied without filler for a suitable joint and process. Buyers should not state that TIG always adds filler or always produces a particular weld size. MIG continuously feeds wire, but this does not make the process automatically robotic or fully automated. Equipment configuration, fixturing and control vary by factory and product.<\/p>\n<h3>How should buyers compare process choice for a hardware joint?<\/h3>\n<p>Compare the actual product requirements, as shown below. Each row is a prompt for a supplier discussion and sample review, not a process ranking. The same process can yield different outcomes across materials, thicknesses, joint designs, fixtures and production controls.<\/p>\n<div class=\"wp-block-table koitor-responsive-table\" style=\"max-width:100%;overflow-x:auto;\">\n<table style=\"width:100%;border-collapse:collapse;overflow-wrap:anywhere;\">\n<thead>\n<tr>\n<th>Requisitos do comprador<\/th>\n<th>What to compare<\/th>\n<th>What the process name cannot prove<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Joint geometry<\/td>\n<td>Gap, overlap, corner, access and sequence<\/td>\n<td>That the joint is feasible or adequate without a drawing review<\/td>\n<\/tr>\n<tr>\n<td>Material e espessura<\/td>\n<td>Base material, surface condition and compatibility<\/td>\n<td>A universal thickness limit or suitable consumable<\/td>\n<\/tr>\n<tr>\n<td>Filler and shielding<\/td>\n<td>Filler selection if required and the actual shielding approach<\/td>\n<td>That all MIG settings use the same gas or TIG always needs filler<\/td>\n<\/tr>\n<tr>\n<td>Repeat production<\/td>\n<td>Fixture, operator method, cycle and process control<\/td>\n<td>A guaranteed production rate or cost advantage<\/td>\n<\/tr>\n<tr>\n<td>Apar\u00eancia<\/td>\n<td>Visible weld location, bead profile, spatter and finishing allowance<\/td>\n<td>That a smooth bead proves fusion or strength<\/td>\n<\/tr>\n<tr>\n<td>Distortion and fit<\/td>\n<td>Sequence, heat management, locating features and tolerances<\/td>\n<td>That either process automatically prevents distortion<\/td>\n<\/tr>\n<tr>\n<td>Evidence<\/td>\n<td>Representative samples, agreed inspection and records<\/td>\n<td>Compliance with a code, procedure qualification or customer specification<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>For example, a long visible rail with repeated brackets presents different questions from a one-off repaired part. A repeated design may justify a fixture or a consistent torch path, while a one-off sample may require manual positioning. A wire basket intersection may use a joining process different from a heavier bracket joint. These examples do not imply one named process is used for all products; they show why the same process comparison must be grounded in geometry, material and production plan.<\/p>\n<p>Ask the supplier to identify which requirements drive its recommendation. Is the concern access to the joint, control of a small visible bead, production repetition, material thickness, distortion, or the finish after joining? If the answer is only \u201cthis process is stronger\u201d or \u201cthis process is cheaper,\u201d request the basis and the relevant sample. A buyer can then compare proposals by requirement rather than choosing a process based on a broad ranking from an online chart.<\/p>\n<p>A useful route review can separate three levels of evidence. First, a design review checks whether the torch or electrode can reach the joint and whether the parts can be held consistently. Second, a trial sample reveals fit, alignment, visible appearance and finishing effort. Third, any required functional, engineering or code assessment is defined by the product\u2019s use and applicable requirements. Passing one level does not automatically satisfy the next. For example, an accessible joint on a drawing does not prove that a finished part meets an agreed performance criterion.<\/p>\n<p>For a small wire or sheet-metal joint, access and fixturing may be more important than the name of the process. A curved or hidden joint may require a different torch angle, part orientation or assembly sequence. A cosmetic face may need a design that keeps the weld or subsequent grinding away from the most visible area. If a buyer wants to compare alternatives, supply the same drawing and define the feature that drives the decision.<\/p>\n<figure class=\"wp-block-image size-large koitor-blog-image\" style=\"margin:32px 0;\">\n  <img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-process-weld-sample-review-delivery.webp\" alt=\"TIG and MIG sample joints compared for access and appearance during sourcing review.\" style=\"width:100%;max-width:960px;height:auto;display:block;margin:0 auto;border-radius:10px;\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-process-weld-sample-review-delivery-18x10.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-process-weld-sample-review-delivery-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-process-weld-sample-review-delivery-300x169.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-process-weld-sample-review-delivery-768x432.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-process-weld-sample-review-delivery-1024x576.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-process-weld-sample-review-delivery.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><figcaption style=\"font-size:14px;color:#667085;text-align:center;margin-top:8px;\">Review joint access and finish on samples made to the same drawing and material.<\/figcaption><\/figure>\n<h2>Does TIG or MIG always create a stronger or cleaner joint?<\/h2>\n<p>No. Strength, defect risk and appearance depend on the design and actual welding controls. The process label does not establish joint penetration, fusion, material condition, weld size, fatigue behavior or load capacity. A visually consistent bead can be useful for appearance inspection, but cannot by itself prove internal joint performance. Conversely, a weld that needs cosmetic cleanup is not automatically mechanically inadequate.<\/p>\n<p>If a part has a structural or load-bearing function, the buyer should identify the design load case, safety factors, applicable engineering requirements and evidence needed. A qualified engineer or appropriate testing body must define the method and acceptance criteria. This guide does not supply a load figure or verify any product capacity. For non-structural hardware, buyers still need to specify functional checks that relate to the product, such as fit, alignment, retention or stability, when those are relevant.<\/p>\n<p>\u201cCleaner\u201d can refer to appearance, spatter, discoloration, post-weld grinding or the amount of finishing required. Those are related but distinct observations. A TIG process may offer the welder control in a particular joint; a MIG process may suit repeatable wire-fed deposition in a particular setup. Neither statement means a finished product will be clean without the right design, operator control and inspection. Agree the visible acceptance criteria and identify what post-weld polish or coating will follow.<\/p>\n<p>For a cosmetic part, mark which faces are visible after installation and which welds may be ground or polished. Confirm whether the finishing operation could alter dimensions, remove too much material, round an edge or expose a joint. The buyer should inspect a representative finished sample\u2014not only an as-welded coupon\u2014if the retail appearance includes finishing and coating.<\/p>\n<h2>How do joint access, volume and finishing affect the route?<\/h2>\n<p>The intended production quantity and part sequence can influence a supplier\u2019s recommendation. Wire feeding, fixture design, setup, manual handling and finish operations all shape the cost and repeatability of a route. A quotation may reflect the whole manufacturing plan, not just arc time. Buyers should compare like-for-like offers using the same part revision, batch quantity, weld locations, appearance standard, inspection plan and packaging.<\/p>\n<p>Small-batch or changing designs may require different setup and review than a stable high-volume part. A process that works on a coupon may be awkward on the assembled frame if the torch cannot reach the joint or if heat distorts a long rail. Before approving a design, ask the supplier to review access and sequence from the intended fixture position. A small geometry change\u2014such as moving a tab or adding access clearance\u2014may improve manufacturability, but the actual effect needs supplier evaluation.<\/p>\n<p>Finishing should be included in the route discussion. Grinding, brushing, polishing, pickling or coating can change appearance and dimensions; the correct process depends on material, finish and product specification. Do not assume a weld can be concealed without a cost or fit effect. Ask whether the proposed finish is applied before or after joining and how the visible face is protected.<\/p>\n<p>When a supplier proposes changing TIG to MIG or vice versa, document the reason and the evidence needed to approve the change. The new process can affect bead profile, filler, heat input, appearance or finishing, depending on the design. Reusing an unchanged sample from the old route does not demonstrate the changed production method. Ask for a sample made with the proposed route and evaluate the same critical features.<\/p>\n<h2>What should buyers request before accepting a welding process proposal?<\/h2>\n<p>Provide the supplier with a controlled drawing, material identification, joint details, quantity, cosmetic-face map and functional requirement. A complete drawing should show weld locations, joint preparation where needed, dimensions affected by welding and which faces are visible. Buyers should also mark datum surfaces and assembly interfaces that can move during joining, and identify whether the part is inspected before or after polishing and coating. If some details are open for supplier recommendation, mark them as proposal items and set an approval checkpoint before mass production.<\/p>\n<p>Ask the supplier to state the proposed process, why it fits the joint, what filler or consumables apply, which areas may require grinding or polishing, and what inspection records are available.<br \/>\nFor a process comparison, ask for the same sample quantity and drawing revision for each route. Make clear if a sample is a feasibility piece, a cosmetic approval sample or the formal pre-production sample; those purposes are not interchangeable. If the factory recommends changing material thickness, joint gap, tab length or weld location to improve access, request a revised drawing and review all affected dimensions before the sample is built. Keep earlier versions for traceability, but mark the approved revision so production cannot follow a superseded sketch.<\/p>\n<p>Agree who owns the decision if the route differs from the original brief. A buyer may approve the overall result but still need the supplier to control process variables internally. Conversely, a buyer\u2019s requirement for a named process should be documented so a lower-cost alternative is not introduced without permission. The purchase order or quality agreement should identify the approved route or the allowed route range, the required change notice, the sample needed after a change and any documents that accompany the shipment.<\/p>\n<p>Do not request unnecessary records that are unrelated to the buyer\u2019s application, but do identify the minimum evidence that supports the decision. That may be a sample record, a drawing revision, visual inspection notes, a functional check or a qualified engineering document, depending on the product. If a regulator or customer standard applies, name the exact requirement and get the right technical review. A general blog comparison cannot define a code-compliant procedure for every application.<\/p>\n<p>The buyer should not ask a supplier to certify a process using a generic phrase. If an applicable code or customer standard is required, identify it and obtain the necessary qualified review and documentation through the responsible party.<\/p>\n<p>Review a representative sample for:<\/p>\n<ul>\n<li>Correct material and part revision.<\/li>\n<li>Weld location, joint closure, alignment and fit to adjoining parts.<\/li>\n<li>Visible bead, spatter, discoloration and finish acceptance.<\/li>\n<li>Post-weld finishing, coating access and any remaining marks.<\/li>\n<li>Functional requirements defined by the product specification.<\/li>\n<li>Repeatability across the sample set when several pieces are needed.<\/li>\n<li>Packaging protection for finished weld areas and adjacent cosmetic faces.<\/li>\n<\/ul>\n<figure class=\"wp-block-image size-large koitor-blog-image\" style=\"margin:32px 0;\">\n  <img decoding=\"async\" src=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-checklist-weld-review-setup-delivery.webp\" alt=\"Weld sample review setup for comparing TIG and MIG process requirements.\" style=\"width:100%;max-width:960px;height:auto;display:block;margin:0 auto;border-radius:10px;\"  srcset=\"https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-checklist-weld-review-setup-delivery-18x12.webp 18w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-checklist-weld-review-setup-delivery-150x150.webp 150w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-checklist-weld-review-setup-delivery-300x200.webp 300w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-checklist-weld-review-setup-delivery-768x512.webp 768w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-checklist-weld-review-setup-delivery-1024x683.webp 1024w, https:\/\/koitorhardware.com\/wp-content\/uploads\/2026\/11\/k1717-checklist-weld-review-setup-delivery.webp 1200w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" loading=\"lazy\"\/><figcaption style=\"font-size:14px;color:#667085;text-align:center;margin-top:8px;\">Record access, material, visible face and inspection expectations with the approved sample.<\/figcaption><\/figure>\n<p>For quote analysis, ask each supplier to separate the assumptions that materially affect price: setup or fixture work, quantity, weld length or locations, finishing, inspection and packaging. The buyer does not need to demand an artificial per-weld price if suppliers calculate work differently. Instead, compare the same delivered scope and ask which change would affect the cost or lead time. A route that needs extra polishing may shift labor from welding to finishing; a fixture may require setup but help control repeated alignment. These are possible cost drivers, not universal savings claims.<\/p>\n<p>When a supplier declines a route, ask which design constraint is responsible. It may be torch access, part movement, material or finish requirements, small order quantity, or a capability limitation. A declined option is useful information for design-for-manufacturing discussions. Do not imply the supplier can offer a process it has not confirmed. The revised design should preserve the buyer\u2019s functional and appearance requirements, and any trade-off should be approved in writing before order release.<\/p>\n<h2>How can a China OEM manufacturer help review the joining route?<\/h2>\n<p>Koitor Hardware is a family-owned factory and specialized OEM manufacturer of bathroom and home-storage metal hardware. The approved company profile supports discussion of confirmed welding processes, including TIG and resistance or laser welding, alongside drawing and sample review, polishing, finishing and assembly. Do not assume Koitor offers MIG welding or any unverified process; ask the factory to confirm the route available for a specific product and current production need.<\/p>\n<p>Buyers can share a drawing or physical sample, identify the material and visible faces, state the quantity and explain the part\u2019s functional requirements. The factory can review the joint, access, assembly sequence, finish and packaging interfaces within its confirmed scope. A process discussion should clarify what information is known, what must be proposed by manufacturing, and what needs the buyer\u2019s approval.<\/p>\n<p>For specialized questions, read the distinct <a href=\"https:\/\/koitorhardware.com\/pt\/tig-arc-length-voltage-heat-input-thin-sheet\/\" style=\"color:#0B5CAD;font-weight:600;text-decoration:underline;text-underline-offset:3px;\">TIG arc-length and thin-sheet process guide<\/a> or the <a href=\"https:\/\/koitorhardware.com\/pt\/welding-stainless-galvanized-dissimilar-joint-coating-removal\/\" style=\"color:#0B5CAD;font-weight:600;text-decoration:underline;text-underline-offset:3px;\">dissimilar stainless and galvanized joint guide<\/a>. Those pages answer narrower process questions; they do not replace the finished-part review in an RFQ.<\/p>\n<p>Record the approved sample, drawing revision and process decision in the order file.<\/p>\n<h2>Buyer checklist and frequently asked questions<\/h2>\n<p>When using this tig vs mig welding guide to compare supplier proposals, place the same drawing, material and quantity beside each quotation. Before approving a TIG or MIG route, confirm:<\/p>\n<ul>\n<li>The exact part, drawing revision, base material and joint geometry.<\/li>\n<li>Whether the process is fixed or the supplier may recommend an alternative.<\/li>\n<li>The proposed process name and consumable\/filler details where relevant.<\/li>\n<li>Joint access, fixture position, assembly sequence and cosmetic-face locations.<\/li>\n<li>Required appearance and post-weld finishing criteria.<\/li>\n<li>The functional requirement and any applicable engineering standard.<\/li>\n<li>Sample quantity, test or inspection method, acceptance criteria and records.<\/li>\n<li>Change notification and reapproval steps if the production process changes.<\/li>\n<li>Packaging protection for welded and finished surfaces.<\/li>\n<li>Whether the quote assumes hand welding, fixtures or an automated cell, and which assumptions are confirmed.<\/li>\n<li>Who approves a change to process, filler, joint geometry or finishing sequence.<\/li>\n<li>Whether a trial sample represents the production fixture and final coating route.<\/li>\n<\/ul>\n<p>If two proposals use different process names, first compare their scope line by line. Check whether both suppliers quote the same metal grade, dimensions, weld locations, finishing standard, assembly and package. If not, a price or appearance difference cannot be attributed to the welding method alone. Request clarification before selecting a route, and retain the buyer-approved version with the sample record.<\/p>\n<h3>Is TIG always stronger than MIG?<\/h3>\n<p>No. Process names alone do not establish joint strength. Design, material, preparation, fit-up, procedure, operator, inspection and application requirements matter. If strength is critical, use an appropriate engineering and qualification plan for the actual part.<\/p>\n<h3>Is TIG always cleaner?<\/h3>\n<p>Not in every part or production condition. Appearance depends on joint access, material, settings, technique, fixture and finishing. Define the visible acceptance criteria and review a finished sample rather than assuming a process guarantees a cosmetic result.<\/p>\n<h3>Is MIG automatically automated?<\/h3>\n<p>No. A wire-fed GMAW process can be operated with different equipment and control arrangements. Ask the supplier what production method is proposed for the exact product instead of inferring automation from the process name.<\/p>\n<h3>Can a buyer approve a process change from photographs?<\/h3>\n<p>Photos can help review visible appearance, but they do not show all joint conditions or prove functional performance. For a material process change, request a representative sample or other evidence matched to the buyer\u2019s requirement and document approval before production.<\/p>\n<h2>Trabalhe com a Koitor Hardware<\/h2>\n<section class=\"koitor-blog-cta\" style=\"margin-top:36px;padding:28px;border:1px solid #D0D5DD;border-radius:16px;background:#F8FAFC;\">\n<h3 style=\"margin-top:0;margin-bottom:12px;font-size:28px;line-height:1.25;color:#101828;\">Review Weld Access and Finish in Your OEM Hardware Drawing<\/h3>\n<p style=\"font-size:16px;line-height:1.7;margin-bottom:20px;color:#344054;\">Send the drawing or sample, material, joint locations, visible-face requirements, target quantity and packaging expectations. Koitor can discuss the confirmed process and product-development scope for your metal hardware project.<\/p>\n<div style=\"display:flex;gap:12px;flex-wrap:wrap;align-items:center;margin-bottom:24px;\">\n    <a href=\"https:\/\/koitorhardware.com\/pt\/contact\/\" style=\"display:inline-flex;align-items:center;justify-content:center;min-height:48px;padding:0 22px;border-radius:8px;background:#FF5A1F;color:#ffffff;font-weight:700;text-decoration:none;line-height:1;\">Send a Drawing or Sample<\/a><br \/>\n    <a href=\"https:\/\/koitorhardware.com\/pt\/oem-home-storage-hardware-manufacturer\/\" style=\"display:inline-flex;align-items:center;justify-content:center;min-height:48px;padding:0 22px;border-radius:8px;border:1px solid #FF5A1F;color:#FF5A1F;background:#ffffff;font-weight:700;text-decoration:none;line-height:1;\">Review OEM Scope<\/a>\n  <\/div>\n<div class=\"koitor-article-tags\" style=\"margin-top:24px;padding-top:18px;border-top:1px solid #E5E7EB;display:flex;align-items:center;gap:8px;flex-wrap:wrap;\">\n    <span style=\"font-size:14px;font-weight:700;color:#344054;margin-right:4px;\">Etiquetas:<\/span><br \/>\n    <span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Qualidade da soldadura<\/span><br \/>\n    <span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Controlo de Qualidade<\/span><br \/>\n    <span style=\"display:inline-flex;align-items:center;justify-content:center;padding:6px 12px;border-radius:999px;background:#FFF3ED;color:#FF5A1F;font-size:13px;font-weight:600;line-height:1.2;\">Guia de compras para importadores<\/span>\n  <\/div>\n<\/section>","protected":false},"excerpt":{"rendered":"<p>TIG vs MIG welding compares two arc-welding processes with different electrode and filler arrangements. TIG (GTAW) uses a non-consumable tungsten electrode and may use separate filler metal; MIG (GMAW) feeds a consumable wire that becomes filler. Neither process is automatically stronger, cheaper or better for every metal hardware part. Buyers should evaluate the joint geometry, [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":8879,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[80],"tags":[40,37,39,50],"class_list":["post-8882","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-manufacturing-process","tag-importer-buying-guide","tag-quality-control","tag-small-batch-oem","tag-welding-quality"],"_links":{"self":[{"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/posts\/8882","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/comments?post=8882"}],"version-history":[{"count":1,"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/posts\/8882\/revisions"}],"predecessor-version":[{"id":8907,"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/posts\/8882\/revisions\/8907"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/media\/8879"}],"wp:attachment":[{"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/media?parent=8882"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/categories?post=8882"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/koitorhardware.com\/pt\/wp-json\/wp\/v2\/tags?post=8882"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}